lkml.org 
[lkml]   [2018]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 16/28] x86/asm: do not annotate functions by GLOBAL
Date
GLOBAL is an x86's custom macro and is going to die very soon. It was
meant for global symbols, but here, it was used for functions. Instead,
use the new macros SYM_FUNC_START* and SYM_CODE_START* (depending on the
type of a function) which are dedicated for global functions. And since
they both require a closing by SYM_*_END, we do this here too.

startup_64, which does not use GLOBAL, but uses .globl explicitly, is
converted too.

in_pm32 should not be global at all as it is used only locally, so
switch to SYM_FUNC_START_LOCAL_NOALIGN.

"No alignments" are preserved.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <x86@kernel.org>
---
arch/x86/boot/copy.S | 16 ++++++++--------
arch/x86/boot/pmjump.S | 8 ++++----
arch/x86/kernel/head_64.S | 5 +++--
3 files changed, 15 insertions(+), 14 deletions(-)

diff --git a/arch/x86/boot/copy.S b/arch/x86/boot/copy.S
index 15d9f74b0008..73aa8307a10f 100644
--- a/arch/x86/boot/copy.S
+++ b/arch/x86/boot/copy.S
@@ -17,7 +17,7 @@
.code16
.text

-GLOBAL(memcpy)
+SYM_FUNC_START_NOALIGN(memcpy)
pushw %si
pushw %di
movw %ax, %di
@@ -31,9 +31,9 @@ GLOBAL(memcpy)
popw %di
popw %si
retl
-ENDPROC(memcpy)
+SYM_FUNC_END(memcpy)

-GLOBAL(memset)
+SYM_FUNC_START_NOALIGN(memset)
pushw %di
movw %ax, %di
movzbl %dl, %eax
@@ -46,22 +46,22 @@ GLOBAL(memset)
rep; stosb
popw %di
retl
-ENDPROC(memset)
+SYM_FUNC_END(memset)

-GLOBAL(copy_from_fs)
+SYM_FUNC_START_NOALIGN(copy_from_fs)
pushw %ds
pushw %fs
popw %ds
calll memcpy
popw %ds
retl
-ENDPROC(copy_from_fs)
+SYM_FUNC_END(copy_from_fs)

-GLOBAL(copy_to_fs)
+SYM_FUNC_START_NOALIGN(copy_to_fs)
pushw %es
pushw %fs
popw %es
calll memcpy
popw %es
retl
-ENDPROC(copy_to_fs)
+SYM_FUNC_END(copy_to_fs)
diff --git a/arch/x86/boot/pmjump.S b/arch/x86/boot/pmjump.S
index 3e0edc6d2a20..b90e42eb1a62 100644
--- a/arch/x86/boot/pmjump.S
+++ b/arch/x86/boot/pmjump.S
@@ -23,7 +23,7 @@
/*
* void protected_mode_jump(u32 entrypoint, u32 bootparams);
*/
-GLOBAL(protected_mode_jump)
+SYM_FUNC_START_NOALIGN(protected_mode_jump)
movl %edx, %esi # Pointer to boot_params table

xorl %ebx, %ebx
@@ -44,11 +44,11 @@ GLOBAL(protected_mode_jump)
.byte 0x66, 0xea # ljmpl opcode
2: .long in_pm32 # offset
.word __BOOT_CS # segment
-ENDPROC(protected_mode_jump)
+SYM_FUNC_END(protected_mode_jump)

.code32
.section ".text32","ax"
-GLOBAL(in_pm32)
+SYM_FUNC_START_LOCAL_NOALIGN(in_pm32)
# Set up data segments for flat 32-bit mode
movl %ecx, %ds
movl %ecx, %es
@@ -74,4 +74,4 @@ GLOBAL(in_pm32)
lldt %cx

jmpl *%eax # Jump to the 32-bit entrypoint
-ENDPROC(in_pm32)
+SYM_FUNC_END(in_pm32)
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 80b620c824eb..48e71043b99c 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -50,8 +50,7 @@ L3_START_KERNEL = pud_index(__START_KERNEL_map)
.text
__HEAD
.code64
- .globl startup_64
-startup_64:
+SYM_CODE_START_NOALIGN(startup_64)
UNWIND_HINT_EMPTY
/*
* At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
@@ -91,6 +90,8 @@ startup_64:
/* Form the CR3 value being sure to include the CR3 modifier */
addq $(early_top_pgt - __START_KERNEL_map), %rax
jmp 1f
+SYM_CODE_END(startup_64)
+
ENTRY(secondary_startup_64)
UNWIND_HINT_EMPTY
/*
--
2.16.3
\
 
 \ /
  Last update: 2018-05-18 11:19    [W:0.185 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site