Messages in this thread Patch in this message | | | From | Hernán Gonzalez <> | Subject | [PATCH] ARM: dts: imx53-qsb: Use IRQ_TYPE specifier | Date | Sun, 13 May 2018 20:26:28 -0300 |
| |
Replace magic number with the proper IRQ_TYPE specifier to improve DT readability.
Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar> --- arch/arm/boot/dts/imx53-qsb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index d3d662e..dca6c32 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -23,7 +23,7 @@ compatible = "dlg,da9053-aa", "dlg,da9052"; reg = <0x48>; interrupt-parent = <&gpio7>; - interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */ + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */ regulators { buck1_reg: buck1 { -- 2.7.4
| |