lkml.org 
[lkml]   [2018]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] net: phy: marvell: Enable interrupt function on LED2 pin
Date
Andrew Lunn <andrew@lunn.ch> writes:

>> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index
>> 0e0978d8a0eb..f03a510f1247 100644
>> --- a/drivers/net/phy/marvell.c
>> +++ b/drivers/net/phy/marvell.c
>> @@ -457,6 +457,21 @@ static int marvell_of_reg_init(struct phy_device
>> *phydev) } #endif /* CONFIG_OF_MDIO */
>>
>> +static int m88e1318_config_intr(struct phy_device *phydev) {
>> + int err;
>> +
>> + err = marvell_config_intr(phydev);
>> + if (err)
>> + return err;
>> +
>> + /* Setup LED[2] as interrupt pin (active low) */
>> + return phy_modify(phydev, MII_88E1318S_PHY_LED_TCR,
>> + MII_88E1318S_PHY_LED_TCR_FORCE_INT,
>> + MII_88E1318S_PHY_LED_TCR_INTn_ENABLE |
>> + MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW);
>>
>> Can we move this part of the code to m88e1121_config_init() ?
>>
>> Every time whether we disable or enable the interrupts this part of code
>> will execute.
>
> Yes, doing this once would be better. But please allow the LED pin to
> be used as an LED when not using interrupts. phy_interrupt_is_valid()
> should be involved somehow.

This should be addressed in v2 of the patch which I have already posted.

/Esben

\
 
 \ /
  Last update: 2018-04-06 19:12    [W:0.603 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site