lkml.org 
[lkml]   [2018]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [RFC 5/6] dmaengine: xilinx_dma: Program interrupt delay timeout
Date
Hi Vinod,

> -----Original Message-----
> From: Vinod Koul [mailto:vinod.koul@intel.com]
> Sent: Wednesday, April 11, 2018 2:42 PM
> To: Radhey Shyam Pandey <radheys@xilinx.com>
> Cc: dan.j.williams@intel.com; michal.simek@xilinx.com; Appana Durga
> Kedareswara Rao <appanad@xilinx.com>; Radhey Shyam Pandey
> <radheys@xilinx.com>; lars@metafoo.de; dmaengine@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: [RFC 5/6] dmaengine: xilinx_dma: Program interrupt delay
> timeout
>
> On Mon, Apr 02, 2018 at 04:09:05PM +0530, Radhey Shyam Pandey wrote:
> > Program IRQDelay for AXI DMA. The interrupt timeout mechanism causes
> > the DMA engine to generate an interrupt after the delay time period
> > has expired. It enables dmaengine to respond in real-time even though
> > interrupt coalescing is configured.
>
> again you are doing this only for axieth_connected, why is that?
The initial application was axieth but yes delay timeout feature may
be needed for other use cases as well. We can make delay timeout
an optional DT property. Is that fine?

>
> >
> > Signed-off-by: Radhey Shyam Pandey <radheys@xilinx.com>
> > ---
> > drivers/dma/xilinx/xilinx_dma.c | 16 ++++++++++++++--
> > 1 files changed, 14 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/dma/xilinx/xilinx_dma.c
> b/drivers/dma/xilinx/xilinx_dma.c
> > index 518465e..ab8f1b0 100644
> > --- a/drivers/dma/xilinx/xilinx_dma.c
> > +++ b/drivers/dma/xilinx/xilinx_dma.c
> > @@ -161,8 +161,12 @@
> > /* AXI DMA Specific Masks/Bit fields */
> > #define XILINX_DMA_MAX_TRANS_LEN GENMASK(22, 0)
> > #define XILINX_DMA_CR_COALESCE_MAX GENMASK(23, 16)
> > +#define XILINX_DMA_CR_DELAY_MAX GENMASK(31, 24)
> > #define XILINX_DMA_CR_CYCLIC_BD_EN_MASK BIT(4)
> > #define XILINX_DMA_CR_COALESCE_SHIFT 16
> > +#define XILINX_DMA_CR_DELAY_SHIFT 24
> > +#define XILINX_DMA_CR_WAITBOUND_DFT 254
> > +
> > #define XILINX_DMA_BD_SOP BIT(27)
> > #define XILINX_DMA_BD_EOP BIT(26)
> > #define XILINX_DMA_COALESCE_MAX 255
> > @@ -1294,6 +1298,12 @@ static void xilinx_dma_start_transfer(struct
> xilinx_dma_chan *chan)
> > reg &= ~XILINX_DMA_CR_COALESCE_MAX;
> > reg |= chan->desc_pendingcount <<
> > XILINX_DMA_CR_COALESCE_SHIFT;
> > +
> > + if (chan->xdev->has_axieth_connected) {
> > + reg &= ~XILINX_DMA_CR_DELAY_MAX;
> > + reg |= XILINX_DMA_CR_WAITBOUND_DFT <<
> > + XILINX_DMA_CR_DELAY_SHIFT;
> > + }
> > dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
> > }
> >
> > @@ -1508,7 +1518,8 @@ static irqreturn_t xilinx_dma_irq_handler(int irq,
> void *data)
> > }
> > }
> >
> > - if (status & XILINX_DMA_DMASR_DLY_CNT_IRQ) {
> > + if (!chan->xdev->has_axieth_connected && (status &
> > + XILINX_DMA_DMASR_DLY_CNT_IRQ)) {
> > /*
> > * Device takes too long to do the transfer when user
> requires
> > * responsiveness.
> > @@ -1516,7 +1527,8 @@ static irqreturn_t xilinx_dma_irq_handler(int irq,
> void *data)
> > dev_dbg(chan->dev, "Inter-packet latency too long\n");
> > }
> >
> > - if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
> > + if (status & (XILINX_DMA_DMASR_FRM_CNT_IRQ |
> > + XILINX_DMA_DMASR_DLY_CNT_IRQ)) {
> > spin_lock(&chan->lock);
> > xilinx_dma_complete_descriptor(chan);
> > chan->idle = true;
> > --
> > 1.7.1
> >
>
> --
> ~Vinod

\
 
 \ /
  Last update: 2018-04-17 14:49    [W:0.191 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site