[lkml]   [2018]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/6] Add support for PWM input capture on STM32
This series adds support for capture to stm32-pwm driver.
Capture is based on DMAs.
- First two patches add support for requesting DMAs to MFD core
- Next three patches add support for capture to stm32-pwm driver
- This has been tested on stm32429i-eval board.

Changes in v3:
- Dropped 2 precusor patches applied by Thierry in pwm tree:
"pwm: stm32: fix, remove unused struct device"
"pwm: stm32: protect common prescaler for all channels"
- Note: this series applies on top on pwm tree
- Implements Lee's comments on MFD part: rework stm32_timers_dma struct,
exported routine prototype now use generic device struct, more
various comments (see patch 2 changelog).

Resend v2:
- Add collected Acks

Changes in v2:
- Abstract DMA handling from child driver: move it to MFD core
- Rework pwm capture routines to adopt this change
- Comment on optional dma support, beautify DMAs probe

Fabrice Gasnier (6):
dt-bindings: mfd: stm32-timers: add support for dmas
mfd: stm32-timers: add support for dmas
pwm: stm32: add capture support
pwm: stm32: improve capture by tuning counter prescaler
pwm: stm32: use input prescaler to improve period capture
ARM: dts: stm32: Enable pwm3 input capture on stm32f429i-eval

.../devicetree/bindings/mfd/stm32-timers.txt | 20 ++
arch/arm/boot/dts/stm32429i-eval.dts | 3 +
drivers/mfd/stm32-timers.c | 219 +++++++++++++++++-
drivers/pwm/pwm-stm32.c | 257 +++++++++++++++++++++
include/linux/mfd/stm32-timers.h | 44 ++++
5 files changed, 541 insertions(+), 2 deletions(-)


 \ /
  Last update: 2018-03-30 12:03    [W:0.100 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site