Messages in this thread | | | Date | Fri, 23 Mar 2018 17:40:26 +0100 | From | Greg Kroah-Hartman <> | Subject | Re: [PATCH 4.15 00/84] 4.15.13-stable review |
| |
On Fri, Mar 23, 2018 at 07:52:45PM +0530, Naresh Kamboju wrote: > On 23 March 2018 at 15:23, Greg Kroah-Hartman > <gregkh@linuxfoundation.org> wrote: > > This is the start of the stable review cycle for the 4.15.13 release. > > There are 84 patches in this series, all will be posted as a response > > to this one. If anyone has any issues with these being applied, please > > let me know. > > > > Responses should be made by Sun Mar 25 09:53:34 UTC 2018. > > Anything received after that time might be too late. > > > > The whole patch series can be found in one patch at: > > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.13-rc1.gz > > or in the git tree and branch at: > > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y > > and the diffstat can be found below. > > > > thanks, > > > > greg k-h > > > > ------------- > > Pseudo-Shortlog of commits: > > > > Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > Linux 4.15.13-rc1 > > > > Leon Romanovsky <leonro@mellanox.com> > > RDMA/ucma: Don't allow join attempts for unsupported AF family > > > > Leon Romanovsky <leonro@mellanox.com> > > RDMA/ucma: Fix access to non-initialized CM_ID object > > > > Jerome Brunet <jbrunet@baylibre.com> > > clk: migrate the count of orphaned clocks at init > > > > Tatyana Nikolova <tatyana.e.nikolova@intel.com> > > RDMA/core: Do not use invalid destination in determining port reuse > > > > Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > serial: 8250_pci: Don't fail on multiport card class > > > > Adit Ranadive <aditr@vmware.com> > > RDMA/vmw_pvrdma: Fix usage of user response structures in ABI file > > > > Boris Pismenny <borisp@mellanox.com> > > IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq > > > > Boris Pismenny <borisp@mellanox.com> > > IB/mlx5: Fix integer overflows in mlx5_ib_create_srq > > > > Vignesh R <vigneshr@ti.com> > > dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63 > > > > Gary R Hook <gary.hook@amd.com> > > hwrng: core - Clean up RNG list when last hwrng is unregistered > > > > Lars Persson <lars.persson@axis.com> > > crypto: artpec6 - set correct iv size for gcm(aes) > > > > Sergej Sawazki <sergej@taudac.com> > > clk: si5351: Rename internal plls to avoid name collisions > > > > Lars-Peter Clausen <lars@metafoo.de> > > clk: axi-clkgen: Correctly handle nocount bit in recalc_rate() > > > > Stephen Boyd <sboyd@codeaurora.org> > > clk: Don't touch hardware when reparenting during registration > > > > Romain Izard <romain.izard.pro@gmail.com> > > clk: at91: pmc: Wait for clocks when resuming > > > > Benjamin Coddington <bcodding@redhat.com> > > nfsd4: permit layoutget of executable-only files > > > > Joel Stanley <joel@jms.id.au> > > ARM: dts: aspeed-evb: Add unit name to memory node > > > > Anton Vasilyev <vasilyev@ispras.ru> > > RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS > > > > James Smart <jsmart2021@gmail.com> > > scsi: lpfc: Fix issues connecting with nvme initiator > > > > James Smart <jsmart2021@gmail.com> > > scsi: lpfc: Fix SCSI LUN discovery when SCSI and NVME enabled > > > > Johan Hovold <johan@kernel.org> > > soc: qcom: smsm: fix child-node lookup > > > > Haishuang Yan <yanhaishuang@cmss.chinamobile.com> > > ip_gre: fix potential memory leak in erspan_rcv > > > > Haishuang Yan <yanhaishuang@cmss.chinamobile.com> > > ip_gre: fix error path when erspan_rcv failed > > > > Alexey Kodanev <alexey.kodanev@oracle.com> > > ip6_vti: adjust vti mtu according to mtu of lower device > > > > Jerry Snitselaar <jsnitsel@redhat.com> > > iommu/vt-d: clean up pr_irq if request_threaded_irq fails > > > > Brian Norris <briannorris@chromium.org> > > pinctrl: rockchip: enable clock when reading pin direction register > > > > Florian Fainelli <f.fainelli@gmail.com> > > pinctrl: Really force states during suspend/resume > > > > Jerome Brunet <jbrunet@baylibre.com> > > clk: use round rate to bail out early in set_rate > > > > Jonathan Neuschäfer <j.neuschaefer@gmx.net> > > dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000 > > > > Jerome Brunet <jbrunet@baylibre.com> > > clk: check ops pointer on clock register > > > > Mauro Carvalho Chehab <mchehab@kernel.org> > > media: davinci: fix a debug printk > > > > Geert Uytterhoeven <geert+renesas@glider.be> > > PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures > > > > Niklas Cassel <niklas.cassel@axis.com> > > PCI: endpoint: Fix find_first_zero_bit() usage > > > > Kishon Vijay Abraham I <kishon@ti.com> > > PCI: designware-ep: Fix ->get_msi() to check MSI_EN bit > > > > Robert Walker <robert.walker@arm.com> > > coresight: Fix disabling of CoreSight TPIU > > > > Sahara <keun-o.park@darkmatter.ae> > > pty: cancel pty slave port buf's work in tty_release > > > > Peter Ujfalusi <peter.ujfalusi@ti.com> > > drm/omap: DMM: Check for DMM readiness after successful transaction commit > > > > Zhoujie Wu <zjwu@marvell.com> > > mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable > > > > H. Nikolaus Schaller <hns@goldelico.com> > > omapdrm: panel: fix compatible vendor string for td028ttec1 > > > > Bjorn Helgaas <bhelgaas@google.com> > > vgacon: Set VGA struct resource types > > > > Bjorn Helgaas <bhelgaas@google.com> > > PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristics > > > > Yonghong Song <yhs@fb.com> > > bpf/cgroup: fix a verification error for a CGROUP_DEVICE type prog > > > > Bharat Potnuri <bharat@chelsio.com> > > iser-target: avoid reinitializing rdma contexts for isert commands > > > > Artemy Kovalyov <artemyko@mellanox.com> > > IB/umem: Fix use of npages/nmap fields > > > > Parav Pandit <parav@mellanox.com> > > RDMA/cma: Use correct size when writing netlink stats > > > > Erez Shitrit <erezsh@mellanox.com> > > IB/ipoib: Avoid memory leak if the SA returns a different DGID > > > > Alexandre Belloni <alexandre.belloni@free-electrons.com> > > rtc: ac100: Fix multiple race conditions > > > > Shuah Khan <shuah@kernel.org> > > media: s5p-mfc: Fix lock contention - request_firmware() once > > > > Russell King <rmk+kernel@armlinux.org.uk> > > sfp: fix non-detection of PHY > > > > Russell King <rmk+kernel@armlinux.org.uk> > > sfp: fix EEPROM reading in the case of non-SFF8472 SFPs > > > > Jerome Brunet <jbrunet@baylibre.com> > > net: phy: meson-gxl: check phy_write return value > > > > Kees Cook <keescook@chromium.org> > > /dev/mem: Add bounce buffer for copy-out > > > > Liu, Changcheng <changcheng.liu@intel.com> > > mmc: block: fix logical error to avoid memory leak > > > > Daniel Drake <drake@endlessm.com> > > mmc: avoid removing non-removable hosts during suspend > > > > Logan Gunthorpe <logang@deltatee.com> > > drm/tilcdc: ensure nonatomic iowrite64 is not used > > > > Kedareswara rao Appana <appana.durga.rao@xilinx.com> > > dmaengine: zynqmp_dma: Fix race condition in the probe > > > > Shawn Nematbakhsh <shawnn@chromium.org> > > platform/chrome: Use proper protocol transfer function > > > > Guenter Roeck <linux@roeck-us.net> > > watchdog: Fix kref imbalance seen if handle_boot_enabled=0 > > > > Guenter Roeck <linux@roeck-us.net> > > watchdog: Fix potential kref imbalance when opening watchdog > > > > Arnd Bergmann <arnd@arndb.de> > > cros_ec: fix nul-termination for firmware build info > > > > Stefan Potyra <Stefan.Potyra@elektrobit.com> > > serial: 8250_dw: Disable clock on error > > > > Sebastian Andrzej Siewior <bigeasy@linutronix.de> > > tty: goldfish: Enable 'earlycon' only if built-in > > > > Bjørn Mork <bjorn@mork.no> > > qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect > > > > Ron Economos <w6rz@comcast.net> > > media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart > > > > Balaji Pothunoori <bpothuno@qti.qualcomm.com> > > ath10k: handling qos at STA side based on AP WMM enable/disable > > > > Christophe JAILLET <christophe.jaillet@wanadoo.fr> > > media: bt8xx: Fix err 'bt878_probe()' > > > > Nicolas Iooss <nicolas.iooss_linux@m4x.org> > > rtlwifi: always initialize variables given to RT_TRACE() > > > > Tsang-Shian Lin <thlin@realtek.com> > > rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled. > > > > Roman Gushchin <guro@fb.com> > > libbpf: prefer global symbols as bpf program name source > > > > Geert Uytterhoeven <geert+renesas@glider.be> > > spi: sh-msiof: Avoid writing to registers from spi_master.setup() > > > > Neal Cardwell <ncardwell@google.com> > > tcp: allow TLP in ECN CWR > > > > Haiyang Zhang <haiyangz@microsoft.com> > > hv_netvsc: Fix the TX/RX buffer default sizes > > > > Haiyang Zhang <haiyangz@microsoft.com> > > hv_netvsc: Fix the receive buffer size limit > > > > Geert Uytterhoeven <geert@linux-m68k.org> > > RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo() > > > > Yuval Shaia <yuval.shaia@oracle.com> > > IB/ipoib: Warn when one port fails to initialize > > > > Richard Leitner <richard.leitner@skidata.com> > > net: fec: add phy_reset_after_clk_enable() support > > This fails to build for arm32 with default config on both 4.14 and 4.15 > > GCCVERSION ?= "linaro-6.2" > > drivers/net/ethernet/freescale/fec_main.c: In function 'fec_enet_clk_enable': > drivers/net/ethernet/freescale/fec_main.c:1876:3: error: implicit declaration > of function phy_reset_after_clk_enable [-Werror=implicit-function-declaration] > phy_reset_after_clk_enable(ndev->phydev); > ^~~~~~~~~~~~~~~~~~~~~~~~~~ > cc1: some warnings being treated as errors
Now dropped from 4.14.y and 4.15.y queues, thanks.
greg k-h
| |