lkml.org 
[lkml]   [2018]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH linux dev-4.16] drivers: i2c: master arbiter: create driver
From
Date
Hi Ken,

Thanks for the patch!

I would have liked this subject:
i2c: muxes: pca9641: new driver

On 2018-03-19 12:38, Ken Chen wrote:
> Initial PCA9641 2 chennel I2C bus master arbiter

channel

> with separate implementation. It has probe issue
> and difference device hehavior between PCA9541

behavior

> and PCA9641 in original PCA9641 patch.
>
> Signed-off-by: Ken Chen <chen.kenyy@inventec.com>
> ---
> drivers/i2c/muxes/Kconfig | 9 +
> drivers/i2c/muxes/Makefile | 1 +
> drivers/i2c/muxes/i2c-mux-pca9641.c | 360 ++++++++++++++++++++++++++++++++++++

Given the big similarities between this and the pca9541 driver,
I would very much prefer if you could extend that driver instead
of making an almost-copy like this.

I have added some comments below anyway, but most of them are
irrelevant given that I want this merged with the pca9541 driver.

But maybe Guenter feels differently about that merge?

> 3 files changed, 370 insertions(+)
> create mode 100644 drivers/i2c/muxes/i2c-mux-pca9641.c
>
> diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
> index 52a4a92..f9c51b8 100644
> --- a/drivers/i2c/muxes/Kconfig
> +++ b/drivers/i2c/muxes/Kconfig
> @@ -73,6 +73,15 @@ config I2C_MUX_PCA954x
> This driver can also be built as a module. If so, the module
> will be called i2c-mux-pca954x.
>
> +config I2C_MUX_PCA9641
> + tristate "NXP PCA9641 I2C Master demultiplexer"
> + help
> + If you say yes here you get support for the NXP PCA9641
> + I2C Master demultiplexer with an arbiter function.
> +
> + This driver can also be built as a module. If so, the module
> + will be called i2c-mux-pca9641.
> +
> config I2C_MUX_PINCTRL
> tristate "pinctrl-based I2C multiplexer"
> depends on PINCTRL
> diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
> index 6d9d865..a229a1a 100644
> --- a/drivers/i2c/muxes/Makefile
> +++ b/drivers/i2c/muxes/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_I2C_MUX_LTC4306) += i2c-mux-ltc4306.o
> obj-$(CONFIG_I2C_MUX_MLXCPLD) += i2c-mux-mlxcpld.o
> obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
> obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
> +obj-$(CONFIG_I2C_MUX_PCA9641) += i2c-mux-pca9641.o
> obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o
> obj-$(CONFIG_I2C_MUX_REG) += i2c-mux-reg.o
>
> diff --git a/drivers/i2c/muxes/i2c-mux-pca9641.c b/drivers/i2c/muxes/i2c-mux-pca9641.c
> new file mode 100644
> index 0000000..bcf45c8
> --- /dev/null
> +++ b/drivers/i2c/muxes/i2c-mux-pca9641.c
> @@ -0,0 +1,360 @@
> +/*
> + * I2C demultiplexer driver for PCA9641 bus master demultiplexer
> + *
> + * Copyright (c) 2010 Ericsson AB.
> + *
> + * Author: Ken Chen <chen.kenyy@inventec.com>

A bit rich to claim to be the sole author, when you clearly "just"
modified the pca9541 driver. Please state the history!

> + *
> + * Derived from:

Maybe you intended to add something here, but forgot?

> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/jiffies.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include <linux/device.h>
> +#include <linux/i2c.h>
> +#include <linux/i2c-mux.h>
> +
> +#include <linux/i2c/pca954x.h>

What is this last include for? We have moved away from specifying platform
data in (new) code.

> +
> +/*
> + * The PCA9641 is two I2C bus masters demultiplexer. It supports two I2C masters

"is two I2C bus masters" -> "is a two I2C bus master"

> + * connected to a single slave bus.
> + *
> + * It is designed for high reliability dual master I2C bus applications where
> + * correct system operation is required, even when two I2C master issue their
> + * commands at the same time. The arbiter will select a winner and let it work
> + * uninterrupted, and the losing master will take control of the I2C bus after
> + * the winnter has finished. The arbiter also allows for queued requests where

winner

> + * a master requests the downstream bus while the other master has control.
> + *
> + */
> +
> +#define PCA9641_ID 0x01
> +#define PCA9641_ID_MAGIC 0x38
> +
> +#define PCA9641_CONTROL 0x01
> +#define PCA9641_STATUS 0x02
> +#define PCA9641_TIME 0x03
> +
> +#define PCA9641_CTL_LOCK_REQ BIT(0)
> +#define PCA9641_CTL_LOCK_GRANT BIT(1)
> +#define PCA9641_CTL_BUS_CONNECT BIT(2)
> +#define PCA9641_CTL_BUS_INIT BIT(3)
> +#define PCA9641_CTL_SMBUS_SWRST BIT(4)
> +#define PCA9641_CTL_IDLE_TIMER_DIS BIT(5)
> +#define PCA9641_CTL_SMBUS_DIS BIT(6)
> +#define PCA9641_CTL_PRIORITY BIT(7)
> +
> +#define PCA9641_STS_OTHER_LOCK BIT(0)
> +#define PCA9641_STS_BUS_INIT_FAIL BIT(1)
> +#define PCA9641_STS_BUS_HUNG BIT(2)
> +#define PCA9641_STS_MBOX_EMPTY BIT(3)
> +#define PCA9641_STS_MBOX_FULL BIT(4)
> +#define PCA9641_STS_TEST_INT BIT(5)
> +#define PCA9641_STS_SCL_IO BIT(6)
> +#define PCA9641_STS_SDA_IO BIT(7)
> +
> +#define PCA9641_RES_TIME 0x03
> +
> +#define busoff(x, y) (!((x) & PCA9641_CTL_LOCK_GRANT) && \
> + !((y) & PCA9641_STS_OTHER_LOCK))
> +#define other_lock(x) ((x) & PCA9641_STS_OTHER_LOCK)
> +#define lock_grant(x) ((x) & PCA9641_CTL_LOCK_GRANT)
> +
> +/* arbitration timeouts, in jiffies */
> +#define ARB_TIMEOUT (HZ / 8) /* 125 ms until forcing bus ownership */
> +#define ARB2_TIMEOUT (HZ / 4) /* 250 ms until acquisition failure */
> +
> +/* arbitration retry delays, in us */
> +#define SELECT_DELAY_SHORT 50
> +#define SELECT_DELAY_LONG 1000
> +
> +struct pca9641 {
> + struct i2c_client *client;
> + unsigned long select_timeout;
> + unsigned long arb_timeout;
> +};
> +
> +static const struct i2c_device_id pca9641_id[] = {
> + {"pca9641", 0},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, pca9641_id);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id pca9641_of_match[] = {
> + { .compatible = "nxp,pca9641" },

You need to describe the DT binding in Documentation/devicetree/bindings/i2c
See nxp,pca9541.txt for inspiration.

> + {}
> +};
> +#endif
> +
> +/*
> + * Write to chip register. Don't use i2c_transfer()/i2c_smbus_xfer()
> + * as they will try to lock the adapter a second time.
> + */
> +static int pca9641_reg_write(struct i2c_client *client, u8 command, u8 val)
> +{
> + struct i2c_adapter *adap = client->adapter;
> + int ret;
> +
> + if (adap->algo->master_xfer) {
> + struct i2c_msg msg;
> + char buf[2];
> +
> + msg.addr = client->addr;
> + msg.flags = 0;
> + msg.len = 2;
> + buf[0] = command;
> + buf[1] = val;
> + msg.buf = buf;
> + ret = __i2c_transfer(adap, &msg, 1);
> + } else {
> + union i2c_smbus_data data;
> +
> + data.byte = val;
> + ret = adap->algo->smbus_xfer(adap, client->addr,
> + client->flags,
> + I2C_SMBUS_WRITE,
> + command,
> + I2C_SMBUS_BYTE_DATA, &data);
> + }
> +
> + return ret;
> +}
> +
> +/*
> + * Read from chip register. Don't use i2c_transfer()/i2c_smbus_xfer()
> + * as they will try to lock adapter a second time.
> + */
> +static int pca9641_reg_read(struct i2c_client *client, u8 command)
> +{
> + struct i2c_adapter *adap = client->adapter;
> + int ret;
> + u8 val;
> +
> + if (adap->algo->master_xfer) {
> + struct i2c_msg msg[2] = {
> + {
> + .addr = client->addr,
> + .flags = 0,
> + .len = 1,
> + .buf = &command
> + },
> + {
> + .addr = client->addr,
> + .flags = I2C_M_RD,
> + .len = 1,
> + .buf = &val
> + }
> + };
> + ret = __i2c_transfer(adap, msg, 2);
> + if (ret == 2)
> + ret = val;
> + else if (ret >= 0)
> + ret = -EIO;
> + } else {
> + union i2c_smbus_data data;
> +
> + ret = adap->algo->smbus_xfer(adap, client->addr,
> + client->flags,
> + I2C_SMBUS_READ,
> + command,
> + I2C_SMBUS_BYTE_DATA, &data);
> + if (!ret)
> + ret = data.byte;
> + }
> + return ret;
> +}
> +
> +/*
> + * Arbitration management functions
> + */
> +static void pca9641_release_bus(struct i2c_client *client)
> +{
> + pca9641_reg_write(client, PCA9641_CONTROL, 0);
> +}
> +
> +/*
> + * Channel arbitration
> + *
> + * Return values:
> + * <0: error
> + * 0 : bus not acquired
> + * 1 : bus acquired
> + */
> +static int pca9641_arbitrate(struct i2c_client *client)
> +{
> + struct i2c_mux_core *muxc = i2c_get_clientdata(client);
> + struct pca9641 *data = i2c_mux_priv(muxc);
> + int reg_ctl, reg_sts;
> +
> + reg_ctl = pca9641_reg_read(client, PCA9641_CONTROL);
> + if (reg_ctl < 0)
> + return reg_ctl;
> + reg_sts = pca9641_reg_read(client, PCA9641_STATUS);
> +
> + if (busoff(reg_ctl, reg_sts)) {
> + /*
> + * Bus is off. Request ownership or turn it on unless
> + * other master requested ownership.
> + */
> + reg_ctl |= PCA9641_CTL_LOCK_REQ;
> + pca9641_reg_write(client, PCA9641_CONTROL, reg_ctl);
> + reg_ctl = pca9641_reg_read(client, PCA9641_CONTROL);
> +
> + if (lock_grant(reg_ctl)) {
> + /*
> + * Other master did not request ownership,
> + * or arbitration timeout expired. Take the bus.
> + */
> + reg_ctl |= PCA9641_CTL_BUS_CONNECT \
> + | PCA9641_CTL_LOCK_REQ;
> + pca9641_reg_write(client, PCA9641_CONTROL, reg_ctl);
> + data->select_timeout = SELECT_DELAY_SHORT;
> +
> + return 1;
> + } else {
> + /*
> + * Other master requested ownership.
> + * Set extra long timeout to give it time to acquire it.
> + */
> + data->select_timeout = SELECT_DELAY_LONG * 2;
> + }
> + } else if (lock_grant(reg_ctl)) {
> + /*
> + * Bus is on, and we own it. We are done with acquisition.
> + */
> + reg_ctl |= PCA9641_CTL_BUS_CONNECT | PCA9641_CTL_LOCK_REQ;
> + pca9641_reg_write(client, PCA9641_CONTROL, reg_ctl);
> +
> + return 1;
> + } else if (other_lock(reg_sts)) {
> + /*
> + * Other master owns the bus.
> + * If arbitration timeout has expired, force ownership.
> + * Otherwise request it.
> + */
> + data->select_timeout = SELECT_DELAY_LONG;
> + reg_ctl |= PCA9641_CTL_LOCK_REQ;
> + pca9641_reg_write(client, PCA9641_CONTROL, reg_ctl);
> + }
> + return 0;
> +}
> +
> +static int pca9641_select_chan(struct i2c_mux_core *muxc, u32 chan)
> +{
> + struct pca9641 *data = i2c_mux_priv(muxc);
> + struct i2c_client *client = data->client;
> + int ret;
> + unsigned long timeout = jiffies + ARB2_TIMEOUT;
> + /* give up after this time */
> +
> + data->arb_timeout = jiffies + ARB_TIMEOUT;
> + /* force bus ownership after this time */
> +
> + do {
> + ret = pca9641_arbitrate(client);
> + if (ret)
> + return ret < 0 ? ret : 0;
> +
> + if (data->select_timeout == SELECT_DELAY_SHORT)
> + udelay(data->select_timeout);
> + else
> + msleep(data->select_timeout / 1000);
> + } while (time_is_after_eq_jiffies(timeout));
> +
> + return -ETIMEDOUT;
> +}
> +
> +static int pca9641_release_chan(struct i2c_mux_core *muxc, u32 chan)
> +{
> + struct pca9641 *data = i2c_mux_priv(muxc);
> + struct i2c_client *client = data->client;
> +
> + pca9641_release_bus(client);
> + return 0;
> +}
> +
> +/*
> + * I2C init/probing/exit functions
> + */
> +static int pca9641_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct i2c_adapter *adap = client->adapter;
> + struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
> + struct i2c_mux_core *muxc;
> + struct pca9641 *data;
> + int force;
> + int ret;
> +
> + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE_DATA))
> + return -ENODEV;

Reading the data sheet, I noticed that the chip supports I2C device id.
There's a brand new function available in -next [1] that allows you to
check this. See the pca954x driver in -next for an example [2]. It checks
the I2C device id for the newer pca984x chips.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/i2c/i2c-core-base.c
i2c_get_device_id(), currently circa line 2000

[2] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/i2c/muxes/i2c-mux-pca954x.c

> + /*
> + * I2C accesses are unprotected here.
> + * We have to lock the adapter before releasing the bus.
> + */
> + i2c_lock_adapter(adap);
> + pca9641_release_bus(client);
> + i2c_unlock_adapter(adap);
> +
> + /* Create mux adapter */
> +
> + force = 0;
> + if (pdata)
> + force = pdata->modes[0].adap_id;
> + muxc = i2c_mux_alloc(adap, &client->dev, 8, sizeof(*data),

Why 8? Should be 1, no?

> + I2C_MUX_ARBITRATOR,
> + pca9641_select_chan, pca9641_release_chan);
> + if (!muxc)
> + return -ENOMEM;
> +
> + data = i2c_mux_priv(muxc);
> + data->client = client;
> +
> + i2c_set_clientdata(client, muxc);
> +
> +

Lose one of the empty lines here.

> + ret = i2c_mux_add_adapter(muxc, force, 0, 0);
> + if (ret) {
> + dev_err(&client->dev, "failed to register master demultiplexer\n");

This dev_err should go. i2c_mux_add_adapter provides a more
detailed error message on failure.

Cheers,
Peter

> + return ret;
> + }
> +
> + dev_info(&client->dev, "registered master demultiplexer for I2C %s\n",
> + client->name);
> +
> + return 0;
> +}
> +
> +static int pca9641_remove(struct i2c_client *client)
> +{
> + struct i2c_mux_core *muxc = i2c_get_clientdata(client);
> +
> + i2c_mux_del_adapters(muxc);
> + return 0;
> +}
> +
> +static struct i2c_driver pca9641_driver = {
> + .driver = {
> + .name = "pca9641",
> + .of_match_table = of_match_ptr(pca9641_of_match),
> + },
> + .probe = pca9641_probe,
> + .remove = pca9641_remove,
> + .id_table = pca9641_id,
> +};
> +
> +module_i2c_driver(pca9641_driver);
> +
> +MODULE_AUTHOR("Ken Chen <chen.kenyy@inventec.com>");
> +MODULE_DESCRIPTION("PCA9641 I2C master demultiplexer driver");
> +MODULE_LICENSE("GPL v2");
>

\
 
 \ /
  Last update: 2018-03-19 13:46    [W:1.981 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site