lkml.org 
[lkml]   [2018]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH linux dev-4.16] drivers: i2c: master arbiter: create driver
Hi all,
I had merged into i2c-mux-pca9541.c
It will be send out later.

2018-03-19 21:44 GMT+08:00 Guenter Roeck <linux@roeck-us.net>:
> On 03/19/2018 05:45 AM, Peter Rosin wrote:
>>
>> Hi Ken,
>>
>> Thanks for the patch!
>>
>> I would have liked this subject:
>> i2c: muxes: pca9641: new driver
>>
>> On 2018-03-19 12:38, Ken Chen wrote:
>>>
>>> Initial PCA9641 2 chennel I2C bus master arbiter
>>
>>
>> channel
>>
>>> with separate implementation. It has probe issue
>>> and difference device hehavior between PCA9541
>>
>>
>> behavior
>>
>>> and PCA9641 in original PCA9641 patch.
>>>
>>> Signed-off-by: Ken Chen <chen.kenyy@inventec.com>
>>> ---
>>> drivers/i2c/muxes/Kconfig | 9 +
>>> drivers/i2c/muxes/Makefile | 1 +
>>> drivers/i2c/muxes/i2c-mux-pca9641.c | 360
>>> ++++++++++++++++++++++++++++++++++++
>>
>>
>> Given the big similarities between this and the pca9541 driver,
>> I would very much prefer if you could extend that driver instead
>> of making an almost-copy like this.
>>
>> I have added some comments below anyway, but most of them are
>> irrelevant given that I want this merged with the pca9541 driver.
>>
>> But maybe Guenter feels differently about that merge?
>>
>
> Same here. I didn't do a line-by-line comparison, but the code looks very
> similar.
> I did look into the probe function searching for differences after noticing
> "It has probe issue ...", but the difference there must be quite subtle
> since
> I didn't find it. The only real difference seems to be arbitration, but that
> can
> easily be added to the original driver as chip specific functions.
>
>
>>> 3 files changed, 370 insertions(+)
>>> create mode 100644 drivers/i2c/muxes/i2c-mux-pca9641.c
>>>
>>> diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
>>> index 52a4a92..f9c51b8 100644
>>> --- a/drivers/i2c/muxes/Kconfig
>>> +++ b/drivers/i2c/muxes/Kconfig
>>> @@ -73,6 +73,15 @@ config I2C_MUX_PCA954x
>>> This driver can also be built as a module. If so, the module
>>> will be called i2c-mux-pca954x.
>>> +config I2C_MUX_PCA9641
>>> + tristate "NXP PCA9641 I2C Master demultiplexer"
>>> + help
>>> + If you say yes here you get support for the NXP PCA9641
>>> + I2C Master demultiplexer with an arbiter function.
>>> +
>>> + This driver can also be built as a module. If so, the module
>>> + will be called i2c-mux-pca9641.
>>> +
>>> config I2C_MUX_PINCTRL
>>> tristate "pinctrl-based I2C multiplexer"
>>> depends on PINCTRL
>>> diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
>>> index 6d9d865..a229a1a 100644
>>> --- a/drivers/i2c/muxes/Makefile
>>> +++ b/drivers/i2c/muxes/Makefile
>>> @@ -12,6 +12,7 @@ obj-$(CONFIG_I2C_MUX_LTC4306) += i2c-mux-ltc4306.o
>>> obj-$(CONFIG_I2C_MUX_MLXCPLD) += i2c-mux-mlxcpld.o
>>> obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
>>> obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
>>> +obj-$(CONFIG_I2C_MUX_PCA9641) += i2c-mux-pca9641.o
>>> obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o
>>> obj-$(CONFIG_I2C_MUX_REG) += i2c-mux-reg.o
>>> diff --git a/drivers/i2c/muxes/i2c-mux-pca9641.c
>>> b/drivers/i2c/muxes/i2c-mux-pca9641.c
>>> new file mode 100644
>>> index 0000000..bcf45c8
>>> --- /dev/null
>>> +++ b/drivers/i2c/muxes/i2c-mux-pca9641.c
>>> @@ -0,0 +1,360 @@
>>> +/*
>>> + * I2C demultiplexer driver for PCA9641 bus master demultiplexer
>>> + *
>>> + * Copyright (c) 2010 Ericsson AB.
>>> + *
>>> + * Author: Ken Chen <chen.kenyy@inventec.com>
>>
>>
>> A bit rich to claim to be the sole author, when you clearly "just"
>> modified the pca9541 driver. Please state the history!
>>
>
> And while retaining the original copyright.
>
>>> + *
>>> + * Derived from:
>>
>>
>> Maybe you intended to add something here, but forgot?
>>
>>> + *
>>> + * This file is licensed under the terms of the GNU General Public
>>> + * License version 2. This program is licensed "as is" without any
>>> + * warranty of any kind, whether express or implied.
>>> + */
>
>
> New files should use the SPDX license identifier.
>
How can I use the SPDX license?
The previous license is GNU at i2c-mux-pca9541.c
>
>>> +
>>> +#include <linux/module.h>
>>> +#include <linux/jiffies.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/device.h>
>>> +#include <linux/i2c.h>
>>> +#include <linux/i2c-mux.h>
>>> +
>>> +#include <linux/i2c/pca954x.h>
>>
>>
>> What is this last include for? We have moved away from specifying platform
>> data in (new) code.
Fixed
>>
>>> +
>>> +/*
>>> + * The PCA9641 is two I2C bus masters demultiplexer. It supports two I2C
>>> masters
>>
>>
>> "is two I2C bus masters" -> "is a two I2C bus master"
>>
>>> + * connected to a single slave bus.
>>> + *
>>> + * It is designed for high reliability dual master I2C bus applications
>>> where
>>> + * correct system operation is required, even when two I2C master issue
>>> their
>>> + * commands at the same time. The arbiter will select a winner and let
>>> it work
>>> + * uninterrupted, and the losing master will take control of the I2C bus
>>> after
>>> + * the winnter has finished. The arbiter also allows for queued requests
>>> where
>>
>>
>> winner
>>
>>> + * a master requests the downstream bus while the other master has
>>> control.
>>> + *
>>> + */
>>> +
>>> +#define PCA9641_ID 0x01
>>> +#define PCA9641_ID_MAGIC 0x38
>>> +
>>> +#define PCA9641_CONTROL 0x01
>>> +#define PCA9641_STATUS 0x02
>>> +#define PCA9641_TIME 0x03
>>> +
>>> +#define PCA9641_CTL_LOCK_REQ BIT(0)
>>> +#define PCA9641_CTL_LOCK_GRANT BIT(1)
>>> +#define PCA9641_CTL_BUS_CONNECT BIT(2)
>>> +#define PCA9641_CTL_BUS_INIT BIT(3)
>>> +#define PCA9641_CTL_SMBUS_SWRST BIT(4)
>>> +#define PCA9641_CTL_IDLE_TIMER_DIS BIT(5)
>>> +#define PCA9641_CTL_SMBUS_DIS BIT(6)
>>> +#define PCA9641_CTL_PRIORITY BIT(7)
>>> +
>>> +#define PCA9641_STS_OTHER_LOCK BIT(0)
>>> +#define PCA9641_STS_BUS_INIT_FAIL BIT(1)
>>> +#define PCA9641_STS_BUS_HUNG BIT(2)
>>> +#define PCA9641_STS_MBOX_EMPTY BIT(3)
>>> +#define PCA9641_STS_MBOX_FULL BIT(4)
>>> +#define PCA9641_STS_TEST_INT BIT(5)
>>> +#define PCA9641_STS_SCL_IO BIT(6)
>>> +#define PCA9641_STS_SDA_IO BIT(7)
>>> +
>>> +#define PCA9641_RES_TIME 0x03
>>> +
>>> +#define busoff(x, y) (!((x) & PCA9641_CTL_LOCK_GRANT) && \
>>> + !((y) & PCA9641_STS_OTHER_LOCK))
>>> +#define other_lock(x) ((x) & PCA9641_STS_OTHER_LOCK)
>>> +#define lock_grant(x) ((x) & PCA9641_CTL_LOCK_GRANT)
>>> +
>>> +/* arbitration timeouts, in jiffies */
>>> +#define ARB_TIMEOUT (HZ / 8) /* 125 ms until forcing bus
>>> ownership */
>>> +#define ARB2_TIMEOUT (HZ / 4) /* 250 ms until acquisition
>>> failure */
>>> +
>>> +/* arbitration retry delays, in us */
>>> +#define SELECT_DELAY_SHORT 50
>>> +#define SELECT_DELAY_LONG 1000
>>> +
>>> +struct pca9641 {
>>> + struct i2c_client *client;
>>> + unsigned long select_timeout;
>>> + unsigned long arb_timeout;
>>> +};
>>> +
>>> +static const struct i2c_device_id pca9641_id[] = {
>>> + {"pca9641", 0},
>>> + {}
>>> +};
>>> +
>>> +MODULE_DEVICE_TABLE(i2c, pca9641_id);
>>> +
>>> +#ifdef CONFIG_OF
>>> +static const struct of_device_id pca9641_of_match[] = {
>>> + { .compatible = "nxp,pca9641" },
>>
>>
>> You need to describe the DT binding in
>> Documentation/devicetree/bindings/i2c
>> See nxp,pca9541.txt for inspiration.
>>
>>> + {}
>>> +};
>>> +#endif
>>> +
>>> +/*
>>> + * Write to chip register. Don't use i2c_transfer()/i2c_smbus_xfer()
>>> + * as they will try to lock the adapter a second time.
>>> + */
>>> +static int pca9641_reg_write(struct i2c_client *client, u8 command, u8
>>> val)
>>> +{
>>> + struct i2c_adapter *adap = client->adapter;
>>> + int ret;
>>> +
>>> + if (adap->algo->master_xfer) {
>>> + struct i2c_msg msg;
>>> + char buf[2];
>>> +
>>> + msg.addr = client->addr;
>>> + msg.flags = 0;
>>> + msg.len = 2;
>>> + buf[0] = command;
>>> + buf[1] = val;
>>> + msg.buf = buf;
>>> + ret = __i2c_transfer(adap, &msg, 1);
>>> + } else {
>>> + union i2c_smbus_data data;
>>> +
>>> + data.byte = val;
>>> + ret = adap->algo->smbus_xfer(adap, client->addr,
>>> + client->flags,
>>> + I2C_SMBUS_WRITE,
>>> + command,
>>> + I2C_SMBUS_BYTE_DATA, &data);
>>> + }
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +/*
>>> + * Read from chip register. Don't use i2c_transfer()/i2c_smbus_xfer()
>>> + * as they will try to lock adapter a second time.
>>> + */
>>> +static int pca9641_reg_read(struct i2c_client *client, u8 command)
>>> +{
>>> + struct i2c_adapter *adap = client->adapter;
>>> + int ret;
>>> + u8 val;
>>> +
>>> + if (adap->algo->master_xfer) {
>>> + struct i2c_msg msg[2] = {
>>> + {
>>> + .addr = client->addr,
>>> + .flags = 0,
>>> + .len = 1,
>>> + .buf = &command
>>> + },
>>> + {
>>> + .addr = client->addr,
>>> + .flags = I2C_M_RD,
>>> + .len = 1,
>>> + .buf = &val
>>> + }
>>> + };
>>> + ret = __i2c_transfer(adap, msg, 2);
>>> + if (ret == 2)
>>> + ret = val;
>>> + else if (ret >= 0)
>>> + ret = -EIO;
>>> + } else {
>>> + union i2c_smbus_data data;
>>> +
>>> + ret = adap->algo->smbus_xfer(adap, client->addr,
>>> + client->flags,
>>> + I2C_SMBUS_READ,
>>> + command,
>>> + I2C_SMBUS_BYTE_DATA, &data);
>>> + if (!ret)
>>> + ret = data.byte;
>>> + }
>>> + return ret;
>>> +}
>>> +
>>> +/*
>>> + * Arbitration management functions
>>> + */
>>> +static void pca9641_release_bus(struct i2c_client *client)
>>> +{
>>> + pca9641_reg_write(client, PCA9641_CONTROL, 0);
>>> +}
>>> +
>>> +/*
>>> + * Channel arbitration
>>> + *
>>> + * Return values:
>>> + * <0: error
>>> + * 0 : bus not acquired
>>> + * 1 : bus acquired
>>> + */
>>> +static int pca9641_arbitrate(struct i2c_client *client)
>>> +{
>>> + struct i2c_mux_core *muxc = i2c_get_clientdata(client);
>>> + struct pca9641 *data = i2c_mux_priv(muxc);
>>> + int reg_ctl, reg_sts;
>>> +
>>> + reg_ctl = pca9641_reg_read(client, PCA9641_CONTROL);
>>> + if (reg_ctl < 0)
>>> + return reg_ctl;
>>> + reg_sts = pca9641_reg_read(client, PCA9641_STATUS);
>>> +
>>> + if (busoff(reg_ctl, reg_sts)) {
>>> + /*
>>> + * Bus is off. Request ownership or turn it on unless
>>> + * other master requested ownership.
>>> + */
>>> + reg_ctl |= PCA9641_CTL_LOCK_REQ;
>>> + pca9641_reg_write(client, PCA9641_CONTROL, reg_ctl);
>>> + reg_ctl = pca9641_reg_read(client, PCA9641_CONTROL);
>>> +
>>> + if (lock_grant(reg_ctl)) {
>>> + /*
>>> + * Other master did not request ownership,
>>> + * or arbitration timeout expired. Take the bus.
>>> + */
>>> + reg_ctl |= PCA9641_CTL_BUS_CONNECT \
>>> + | PCA9641_CTL_LOCK_REQ;
>>> + pca9641_reg_write(client, PCA9641_CONTROL,
>>> reg_ctl);
>>> + data->select_timeout = SELECT_DELAY_SHORT;
>>> +
>>> + return 1;
>>> + } else {
>>> + /*
>>> + * Other master requested ownership.
>>> + * Set extra long timeout to give it time to
>>> acquire it.
>>> + */
>>> + data->select_timeout = SELECT_DELAY_LONG * 2;
>>> + }
>>> + } else if (lock_grant(reg_ctl)) {
>>> + /*
>>> + * Bus is on, and we own it. We are done with
>>> acquisition.
>>> + */
>>> + reg_ctl |= PCA9641_CTL_BUS_CONNECT |
>>> PCA9641_CTL_LOCK_REQ;
>>> + pca9641_reg_write(client, PCA9641_CONTROL, reg_ctl);
>>> +
>>> + return 1;
>>> + } else if (other_lock(reg_sts)) {
>>> + /*
>>> + * Other master owns the bus.
>>> + * If arbitration timeout has expired, force ownership.
>>> + * Otherwise request it.
>>> + */
>>> + data->select_timeout = SELECT_DELAY_LONG;
>>> + reg_ctl |= PCA9641_CTL_LOCK_REQ;
>>> + pca9641_reg_write(client, PCA9641_CONTROL, reg_ctl);
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static int pca9641_select_chan(struct i2c_mux_core *muxc, u32 chan)
>>> +{
>>> + struct pca9641 *data = i2c_mux_priv(muxc);
>>> + struct i2c_client *client = data->client;
>>> + int ret;
>>> + unsigned long timeout = jiffies + ARB2_TIMEOUT;
>>> + /* give up after this time */
>>> +
>>> + data->arb_timeout = jiffies + ARB_TIMEOUT;
>>> + /* force bus ownership after this time */
>>> +
>>> + do {
>>> + ret = pca9641_arbitrate(client);
>>> + if (ret)
>>> + return ret < 0 ? ret : 0;
>>> +
>>> + if (data->select_timeout == SELECT_DELAY_SHORT)
>>> + udelay(data->select_timeout);
>>> + else
>>> + msleep(data->select_timeout / 1000);
>>> + } while (time_is_after_eq_jiffies(timeout));
>>> +
>>> + return -ETIMEDOUT;
>>> +}
>>> +
>>> +static int pca9641_release_chan(struct i2c_mux_core *muxc, u32 chan)
>>> +{
>>> + struct pca9641 *data = i2c_mux_priv(muxc);
>>> + struct i2c_client *client = data->client;
>>> +
>>> + pca9641_release_bus(client);
>>> + return 0;
>>> +}
>>> +
>>> +/*
>>> + * I2C init/probing/exit functions
>>> + */
>>> +static int pca9641_probe(struct i2c_client *client,
>>> + const struct i2c_device_id *id)
>>> +{
>>> + struct i2c_adapter *adap = client->adapter;
>>> + struct pca954x_platform_data *pdata =
>>> dev_get_platdata(&client->dev);
>>> + struct i2c_mux_core *muxc;
>>> + struct pca9641 *data;
>>> + int force;
>>> + int ret;
>>> +
>>> + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE_DATA))
>>> + return -ENODEV;
>>
>>
>> Reading the data sheet, I noticed that the chip supports I2C device id.
>> There's a brand new function available in -next [1] that allows you to
>> check this. See the pca954x driver in -next for an example [2]. It checks
>> the I2C device id for the newer pca984x chips.
>>
>> [1]
>> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/i2c/i2c-core-base.c
>> i2c_get_device_id(), currently circa line 2000
>>
>> [2]
>> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/i2c/muxes/i2c-mux-pca954x.c
>>
Please help to review new patch the detect ID method.
>>> + /*
>>> + * I2C accesses are unprotected here.
>>> + * We have to lock the adapter before releasing the bus.
>>> + */
>>> + i2c_lock_adapter(adap);
>>> + pca9641_release_bus(client);
>>> + i2c_unlock_adapter(adap);
>>> +
>>> + /* Create mux adapter */
>>> +
>>> + force = 0;
>>> + if (pdata)
>>> + force = pdata->modes[0].adap_id;
>>> + muxc = i2c_mux_alloc(adap, &client->dev, 8, sizeof(*data),
>>
>>
>> Why 8? Should be 1, no?
Yes. should be 1.
>>
>>> + I2C_MUX_ARBITRATOR,
>>> + pca9641_select_chan, pca9641_release_chan);
>>> + if (!muxc)
>>> + return -ENOMEM;
>>> +
>>> + data = i2c_mux_priv(muxc);
>>> + data->client = client;
>>> +
>>> + i2c_set_clientdata(client, muxc);
>>> +
>>> +
>>
>>
>> Lose one of the empty lines here.
Fix
>>
>>> + ret = i2c_mux_add_adapter(muxc, force, 0, 0);
>>> + if (ret) {
>>> + dev_err(&client->dev, "failed to register master
>>> demultiplexer\n");
>>
>>
>> This dev_err should go. i2c_mux_add_adapter provides a more
>> detailed error message on failure.
Removed and follow pca9541 probe code.
>>
>> Cheers,
>> Peter
>>
>>> + return ret;
>>> + }
>>> +
>>> + dev_info(&client->dev, "registered master demultiplexer for I2C
>>> %s\n",
>>> + client->name);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int pca9641_remove(struct i2c_client *client)
>>> +{
>>> + struct i2c_mux_core *muxc = i2c_get_clientdata(client);
>>> +
>>> + i2c_mux_del_adapters(muxc);
>>> + return 0;
>>> +}
>>> +
>>> +static struct i2c_driver pca9641_driver = {
>>> + .driver = {
>>> + .name = "pca9641",
>>> + .of_match_table = of_match_ptr(pca9641_of_match),
>>> + },
>>> + .probe = pca9641_probe,
>>> + .remove = pca9641_remove,
>>> + .id_table = pca9641_id,
>>> +};
>>> +
>>> +module_i2c_driver(pca9641_driver);
>>> +
>>> +MODULE_AUTHOR("Ken Chen <chen.kenyy@inventec.com>");
>>> +MODULE_DESCRIPTION("PCA9641 I2C master demultiplexer driver");
>>> +MODULE_LICENSE("GPL v2");
>>>
>>
>>
>

\
 
 \ /
  Last update: 2018-03-20 07:21    [W:0.052 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site