lkml.org 
[lkml]   [2018]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 05/13] i2c: qup: schedule EOT and FLUSH tags at the end of transfer
From
Date


On 3/12/2018 6:44 PM, Abhishek Sahu wrote:
> The role of FLUSH and EOT tag is to flush already scheduled
> descriptors in BAM HW in case of error. EOT is required only
> when descriptors are scheduled in RX FIFO. If all the messages
> are WRITE, then only FLUSH tag will be used.
>
> A single BAM transfer can have multiple read and write messages.
> The EOT and FLUSH tags should be scheduled at the end of BAM HW
> descriptors. Since the READ and WRITE can be present in any order
> so for some of the cases, these tags are not being written
> correctly.
>
> Following is one of the example
>
> READ, READ, READ, READ
>
> Currently EOT and FLUSH tags are being written after each READ.
> If QUP gets NACK for first READ itself, then flush will be
> triggered. It will look for first FLUSH tag in TX FIFO and will
> stop there so only descriptors for first READ descriptors be
> flushed. All the scheduled descriptors should be cleared to
> generate BAM DMA completion.
>
> Now this patch is scheduling FLUSH and EOT only once after all the
> descriptors. So, flush will clear all the scheduled descriptors and
> BAM will generate the completion interrupt.
>
> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
> ---
>

Reviewed-by: Sricharan R <sricharan@codeaurora.org>

Regards,
Sricharan





> * Changes from v1:
>
> 1. Modified commit message with more details
>
> drivers/i2c/busses/i2c-qup.c | 39 ++++++++++++++++++++++++---------------
> 1 file changed, 24 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
> index d970458..b2e8f57 100644
> --- a/drivers/i2c/busses/i2c-qup.c
> +++ b/drivers/i2c/busses/i2c-qup.c
> @@ -551,7 +551,7 @@ static int qup_i2c_set_tags_smb(u16 addr, u8 *tags, struct qup_i2c_dev *qup,
> }
>
> static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
> - struct i2c_msg *msg, int is_dma)
> + struct i2c_msg *msg)
> {
> u16 addr = i2c_8bit_addr_from_msg(msg);
> int len = 0;
> @@ -592,11 +592,6 @@ static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
> else
> tags[len++] = data_len;
>
> - if ((msg->flags & I2C_M_RD) && last && is_dma) {
> - tags[len++] = QUP_BAM_INPUT_EOT;
> - tags[len++] = QUP_BAM_FLUSH_STOP;
> - }
> -
> return len;
> }
>
> @@ -605,7 +600,7 @@ static int qup_i2c_issue_xfer_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
> int data_len = 0, tag_len, index;
> int ret;
>
> - tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg, 0);
> + tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg);
> index = msg->len - qup->blk.data_len;
>
> /* only tags are written for read */
> @@ -701,7 +696,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
> while (qup->blk.pos < blocks) {
> tlen = (i == (blocks - 1)) ? rem : limit;
> tags = &qup->start_tag.start[off + len];
> - len += qup_i2c_set_tags(tags, qup, msg, 1);
> + len += qup_i2c_set_tags(tags, qup, msg);
> qup->blk.data_len -= tlen;
>
> /* scratch buf to read the start and len tags */
> @@ -729,17 +724,11 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
> return ret;
>
> off += len;
> - /* scratch buf to read the BAM EOT and FLUSH tags */
> - ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++],
> - &qup->brx.tag.start[0],
> - 2, qup, DMA_FROM_DEVICE);
> - if (ret)
> - return ret;
> } else {
> while (qup->blk.pos < blocks) {
> tlen = (i == (blocks - 1)) ? rem : limit;
> tags = &qup->start_tag.start[off + tx_len];
> - len = qup_i2c_set_tags(tags, qup, msg, 1);
> + len = qup_i2c_set_tags(tags, qup, msg);
> qup->blk.data_len -= tlen;
>
> ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++],
> @@ -779,6 +768,26 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
> msg++;
> }
>
> + /* schedule the EOT and FLUSH I2C tags */
> + len = 1;
> + if (rx_cnt) {
> + qup->btx.tag.start[0] = QUP_BAM_INPUT_EOT;
> + len++;
> +
> + /* scratch buf to read the BAM EOT and FLUSH tags */
> + ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++],
> + &qup->brx.tag.start[0],
> + 2, qup, DMA_FROM_DEVICE);
> + if (ret)
> + return ret;
> + }
> +
> + qup->btx.tag.start[len - 1] = QUP_BAM_FLUSH_STOP;
> + ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], &qup->btx.tag.start[0],
> + len, qup, DMA_TO_DEVICE);
> + if (ret)
> + return ret;
> +
> txd = dmaengine_prep_slave_sg(qup->btx.dma, qup->btx.sg, tx_cnt,
> DMA_MEM_TO_DEV,
> DMA_PREP_INTERRUPT | DMA_PREP_FENCE);
>

--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2018-03-15 07:54    [W:0.169 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site