lkml.org 
[lkml]   [2018]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 03/13] i2c: qup: minor code reorganization for use_dma
Date
1. Assigns use_dma in qup_dev structure itself which will
help in subsequent patches to determine the mode in IRQ handler.
2. Does minor code reorganization for loops to reduce the
unnecessary comparison and assignment.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Austin Christ <austinwc@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
---

* Changes from v1: None

drivers/i2c/busses/i2c-qup.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 75e9819..f6ea074 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -181,6 +181,8 @@ struct qup_i2c_dev {

/* dma parameters */
bool is_dma;
+ /* To check if the current transfer is using DMA */
+ bool use_dma;
struct dma_pool *dpool;
struct qup_i2c_tag start_tag;
struct qup_i2c_bam brx;
@@ -1288,7 +1290,7 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
int num)
{
struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
- int ret, len, idx = 0, use_dma = 0;
+ int ret, len, idx = 0;

qup->bus_err = 0;
qup->qup_err = 0;
@@ -1317,13 +1319,12 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
len = (msgs[idx].len > qup->out_fifo_sz) ||
(msgs[idx].len > qup->in_fifo_sz);

- if ((!is_vmalloc_addr(msgs[idx].buf)) && len) {
- use_dma = 1;
- } else {
- use_dma = 0;
+ if (is_vmalloc_addr(msgs[idx].buf) || !len)
break;
- }
}
+
+ if (idx == num)
+ qup->use_dma = true;
}

idx = 0;
@@ -1347,15 +1348,17 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,

reinit_completion(&qup->xfer);

- if (use_dma) {
+ if (qup->use_dma) {
ret = qup_i2c_bam_xfer(adap, &msgs[idx], num);
+ qup->use_dma = false;
+ break;
} else {
if (msgs[idx].flags & I2C_M_RD)
ret = qup_i2c_read_one_v2(qup, &msgs[idx]);
else
ret = qup_i2c_write_one_v2(qup, &msgs[idx]);
}
- } while ((idx++ < (num - 1)) && !use_dma && !ret);
+ } while ((idx++ < (num - 1)) && !ret);

if (!ret)
ret = qup_i2c_change_state(qup, QUP_RESET_STATE);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2018-03-12 14:19    [W:0.147 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site