lkml.org 
[lkml]   [2018]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/4] dt-bindings: mfd: bd9571mwv: Document DDR Backup Mode properties
Date
Document the new optional properties related to DDR Backup Mode and
toggle/momentary power switches.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
- Improve property description,
- Add properties for power switch type.
---
Documentation/devicetree/bindings/mfd/bd9571mwv.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
index 9ab216a851d5619b..8804a214759845c5 100644
--- a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
+++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
@@ -25,6 +25,25 @@ Required properties:
Each child node is defined using the standard
binding for regulators.

+Optional properties:
+ - rohm,ddr-backup-power : Value to use for DDR-Backup Power (default 0).
+ This is a bitmask that specifies which DDR power
+ rails need to be kept powered when backup mode is
+ entered, for system suspend:
+ - bit 0: DDR0
+ - bit 1: DDR1
+ - bit 2: DDR0C
+ - bit 3: DDR1C
+ These bits match the KEEPON_DDR* bits in the
+ documentation for the "BKUP Mode Cnt" register.
+ - rohm,rstbmode-level: The RSTB signal is configured for level mode, to
+ accommodate a toggle power switch (the RSTBMODE pin is
+ strapped low).
+ - rohm,rstbmode-pulse: The RSTB signal is configured for pulse mode, to
+ accommodate a momentary power switch (the RSTBMODE pin
+ is strapped high).
+ The two properties above are mutually exclusive.
+
Example:

pmic: pmic@30 {
@@ -36,6 +55,8 @@ Example:
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
+ rohm,ddr-backup-power = <15>;
+ rohm,rstbmode-pulse;

regulators {
dvfs: dvfs {
--
2.7.4
\
 
 \ /
  Last update: 2018-03-14 12:09    [W:0.087 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site