lkml.org 
[lkml]   [2018]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/8] ASoC: samsung: i2s: Ensure the RCLK rate is properly determined
Date
If the RCLK mux clock configuration is specified in DT and no set_sysclk()
callback is used in the sound card driver the sclk_srcrate field will remain
set to 0, leading to an incorrect PSR divider setting.
To fix this the frequency value is retrieved from the CLK_I2S_RCLK_SRC clock,
so the actual RCLK mux selection is taken into account.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
sound/soc/samsung/i2s.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index 233f1c9a4b6c..aeba0ae890ea 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -656,8 +656,12 @@ static int i2s_set_fmt(struct snd_soc_dai *dai,
tmp |= mod_slave;
break;
case SND_SOC_DAIFMT_CBS_CFS:
- /* Set default source clock in Master mode */
- if (i2s->rclk_srcrate == 0)
+ /*
+ * Set default source clock in Master mode, only when the
+ * CLK_I2S_RCLK_SRC clock is not exposed so we ensure any
+ * clock configuration assigned in DT is not overwritten.
+ */
+ if (i2s->rclk_srcrate == 0 && i2s->clk_data.clks == NULL)
i2s_set_sysclk(dai, SAMSUNG_I2S_RCLKSRC_0,
0, SND_SOC_CLOCK_IN);
break;
@@ -881,6 +885,11 @@ static int config_setup(struct i2s_dai *i2s)
return 0;

if (!(i2s->quirks & QUIRK_NO_MUXPSR)) {
+ struct clk *rclksrc = i2s->clk_table[CLK_I2S_RCLK_SRC];
+
+ if (i2s->rclk_srcrate == 0 && rclksrc && !IS_ERR(rclksrc))
+ i2s->rclk_srcrate = clk_get_rate(rclksrc);
+
psr = i2s->rclk_srcrate / i2s->frmclk / rfs;
writel(((psr - 1) << 8) | PSR_PSREN, i2s->addr + I2SPSR);
dev_dbg(&i2s->pdev->dev,
--
2.14.2
\
 
 \ /
  Last update: 2018-02-05 16:45    [W:0.244 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site