lkml.org 
[lkml]   [2018]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/8] efi: Decode UEFI-defined IA32/X64 Error Structure GUIDs
On 23 February 2018 at 20:03, Yazen Ghannam <Yazen.Ghannam@amd.com> wrote:
> From: Yazen Ghannam <yazen.ghannam@amd.com>
>
> For easier handling, match the known IA32/X64 error structure GUIDs to
> enums.
>
> Also, print out the name of the matching Error Structure Type.
>
> GUIDs taken from UEFI 2.7 section N.2.4.2.1 IA32/X64 Processor Error
> Information Structure.
>
> Cc: <stable@vger.kernel.org> # 4.16.x
> Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
> ---
> drivers/firmware/efi/cper-x86.c | 41 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/drivers/firmware/efi/cper-x86.c b/drivers/firmware/efi/cper-x86.c
> index 9d608f742c98..3b86223bdb67 100644
> --- a/drivers/firmware/efi/cper-x86.c
> +++ b/drivers/firmware/efi/cper-x86.c
> @@ -14,17 +14,53 @@
> #define VALID_CPUID_INFO BIT_ULL(1)
> #define VALID_PROC_ERR_INFO_NUM(bits) ((bits & GENMASK_ULL(7, 2)) >> 2)
>
> +#define INFO_ERR_STRUCT_TYPE_CACHE \
> + GUID_INIT(0xA55701F5, 0xE3EF, 0x43DE, 0xAC, 0x72, 0x24, 0x9B, \
> + 0x57, 0x3F, 0xAD, 0x2C)
> +#define INFO_ERR_STRUCT_TYPE_TLB \
> + GUID_INIT(0xFC06B535, 0x5E1F, 0x4562, 0x9F, 0x25, 0x0A, 0x3B, \
> + 0x9A, 0xDB, 0x63, 0xC3)
> +#define INFO_ERR_STRUCT_TYPE_BUS \
> + GUID_INIT(0x1CF3F8B3, 0xC5B1, 0x49a2, 0xAA, 0x59, 0x5E, 0xEF, \
> + 0x92, 0xFF, 0xA6, 0x3C)
> +#define INFO_ERR_STRUCT_TYPE_MS \
> + GUID_INIT(0x48AB7F57, 0xDC34, 0x4f6c, 0xA7, 0xD3, 0xB0, 0xB5, \
> + 0xB0, 0xA7, 0x43, 0x14)
> +
> #define INFO_VALID_CHECK_INFO BIT_ULL(0)
> #define INFO_VALID_TARGET_ID BIT_ULL(1)
> #define INFO_VALID_REQUESTOR_ID BIT_ULL(2)
> #define INFO_VALID_RESPONDER_ID BIT_ULL(3)
> #define INFO_VALID_IP BIT_ULL(4)
>
> +enum err_types {
> + ERR_TYPE_CACHE = 0,
> + ERR_TYPE_TLB,
> + ERR_TYPE_BUS,
> + ERR_TYPE_MS,
> + N_ERR_TYPES
> +};
> +
> +static enum err_types cper_get_err_type(const guid_t *err_type)
> +{
> + if (guid_equal(err_type, &INFO_ERR_STRUCT_TYPE_CACHE))
> + return ERR_TYPE_CACHE;
> + else if (guid_equal(err_type, &INFO_ERR_STRUCT_TYPE_TLB))
> + return ERR_TYPE_TLB;
> + else if (guid_equal(err_type, &INFO_ERR_STRUCT_TYPE_BUS))
> + return ERR_TYPE_BUS;
> + else if (guid_equal(err_type, &INFO_ERR_STRUCT_TYPE_MS))
> + return ERR_TYPE_MS;
> + else
> + return N_ERR_TYPES;
> +}
> +
> void cper_print_proc_ia(const char *pfx, const struct cper_sec_proc_ia *proc)
> {
> int i;
> struct cper_ia_err_info *err_info;
> char newpfx[64];
> + enum err_types err_type;
>

Can you make this an u8 please? The signedness of an enum is not well
defined, and you only check the upper bound below.

> printk("%sValidation Bits: 0x%016llx\n", pfx, proc->validation_bits);
>
> @@ -46,6 +82,11 @@ void cper_print_proc_ia(const char *pfx, const struct cper_sec_proc_ia *proc)
> printk("%sError Structure Type: %pUl\n", newpfx,
> &err_info->err_type);
>
> + err_type = cper_get_err_type(&err_info->err_type);
> + printk("%sError Structure Type: %s\n", newpfx,
> + err_type < ARRAY_SIZE(cper_proc_error_type_strs) ?
> + cper_proc_error_type_strs[err_type] : "unknown");
> +
> printk("%sValidation Bits: 0x%016llx\n",
> newpfx, err_info->validation_bits);
>
> --
> 2.14.1
>

\
 
 \ /
  Last update: 2018-02-24 17:41    [W:0.114 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site