lkml.org 
[lkml]   [2018]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/3] Add DTS for SDM845 SoC and MTP
Date
These are basic device tree files needed to boot a SDM845 MTP
board to a ramfs based serial console shell

Bindings are based on whats proposed for pinctrl/serial/clock
drivers for SDM845 SoC
pinctrl: https://patchwork.kernel.org/patch/10157143/ (This is now pulled
in by Linus Walleij for 4.17)
clocks: https://lkml.org/lkml/2018/1/31/209 (under review)
serial: https://patchwork.ozlabs.org/cover/860251/ (under review)

'PATCH 3/3' is based on v2 of serial patches, will need an update if
v3 (still in the works) has further binding updates

Since 'PATCH 2/3' also adds an ITS node and keeps it disabled, we also depend
on https://lkml.org/lkml/2018/1/29/383

changes in v3:
* split the pinmux/pinconf nodes across SoC/Board files
* Fixes for issues reported with 'make dtbs W=2'
* other minor fixes based on review

changes in v2:
* dropped cpu-map
* dropped GIC_CPU_MASK_SIMPLE()
* Added new cpu compatible for kryo385
* added ITS node, marked as disabled
* other cosmetic fixes

Rajendra Nayak (3):
dt-bindings: arm: Document kryo385 cpu
arm64: dts: sdm845: Add minimal dts files for sdm845 SoC/MTP
arm64: dts: sdm845: Add serial console support

Documentation/devicetree/bindings/arm/cpus.txt | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 47 ++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 314 +++++++++++++++++++++++++
4 files changed, 363 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sdm845-mtp.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm845.dtsi

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2018-02-12 07:30    [W:0.113 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site