lkml.org 
[lkml]   [2018]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 0/2] SPI-NOR add NPCM FIU controller driver
Date
This patch set adds Flash Interface Unit(FIU) SPI-NOR
support for the Nuvoton NPCM Baseboard Management
Controller (BMC).

The FIU supports single, dual or quad communication interface.

the FIU controller can operate in following modes:
- User Mode Access(UMA): provides flash access by using an
indirect address/data mechanism.
- direct rd/wr mode: maps the flash memory into the core
address space.
- SPI-X mode: used for an expansion bus to an ASIC or CPLD.

The NPCM750/730/715/710 supports up to three FIU devices:
- FIU0 supports two chip select.
- FIU3 supports four chip select.
- FIUX supports two chip select.

The NPCM FIU driver tested on NPCM750 evaluation board.

Tomer Maimon (2):
dt-binding: mtd: add NPCM FIU controller
mtd: spi-nor: add NPCM FIU controller driver

Documentation/devicetree/bindings/mtd/npcm-fiu.txt | 64 ++
drivers/mtd/spi-nor/Kconfig | 8 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/npcm-fiu.c | 930 +++++++++++++++++++++
4 files changed, 1003 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/npcm-fiu.txt
create mode 100644 drivers/mtd/spi-nor/npcm-fiu.c

--
2.14.1

\
 
 \ /
  Last update: 2018-12-03 10:17    [W:0.098 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site