lkml.org 
[lkml]   [2018]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] can: flexcan: add imx8qm support
Date
This patch set intends to add Flexcan support for i.MX8QM platform which
defaultly supports CAN FD protocol. Although BRS enabled by system reset
when the driver sets CAN FD mode, now this patch serial does not support
BRS in the driver. And then I will send patch to enable BRS by changing the
register to set bit timing.

Dong Aisheng (3):
can: rx-offload: add CANFD support based on offload
can: flexcan: add CAN FD mode support
can: flexcan: add imx8qm support

drivers/net/can/flexcan.c | 114 ++++++++++++++++++++++++++++++---
drivers/net/can/rx-offload.c | 16 +++--
include/linux/can/rx-offload.h | 4 +-
3 files changed, 117 insertions(+), 17 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2018-12-19 09:40    [W:0.047 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site