lkml.org 
[lkml]   [2018]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/2] add uart DMA function
Date
In Mediatek SOCs, the uart can support DMA function.
Base on DMA engine formwork, we add the DMA code to support uart. And put the code under drivers/dma.

This series contains document bindings, Kconfig to control the function enable or not,
device tree including interrupt and dma device node, the code of UART DM

Changes compared to v4:
-modify Kconfig depends on.
Changes compared to v3:
-fix CONFIG_PM, will cause build fail
Changes compared to v2:
-remove unimportant parameters
-instead of cookie, use APIs of virtual channel.
-use of_dma_xlate_by_chan_id.
Changes compared to v1:
-mian revised file, 8250_mtk_dma.c
--parameters renamed for standard
--remove atomic operation

Long Cheng (2):
dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
arm: dts: mt2712: add uart APDMA to device tree

arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 50 ++
drivers/dma/mediatek/8250_mtk_dma.c | 830 +++++++++++++++++++++++++++++
drivers/dma/mediatek/Kconfig | 11 +
drivers/dma/mediatek/Makefile | 1 +
4 files changed, 892 insertions(+)
create mode 100644 drivers/dma/mediatek/8250_mtk_dma.c

--
1.7.9.5

\
 
 \ /
  Last update: 2018-12-11 06:38    [W:1.268 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site