lkml.org 
[lkml]   [2018]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 0/3] arm64: dts: qcom: sdm845: Add SD nodes
Date
This series adds the nodes for the SD host controller on SDM845, and wires it
up on the MTP.

Though I tested similar changes on another board, I was unable to actually run
this on an MTP. If someone felt like trying this out on an MTP I would be
grateful.

The original downstream nodes had sleep pinctrl states. It's not obvious to
me that all this messing with drive-strength saves non-negligible amounts of
power, so I didn't add them and figured we could add them later if needed.


Evan Green (3):
dt-bindings: mmc: sdhci-msm: Clarify register requirements
arm64: dts: qcom: sdm845: Add SD nodes
arm64: dts: qcom: sdm845: Add SD nodes for sdm845-mtp

.../devicetree/bindings/mmc/sdhci-msm.txt | 2 +-
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 53 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 15 ++++++
3 files changed, 69 insertions(+), 1 deletion(-)

--
2.18.1

\
 
 \ /
  Last update: 2018-11-28 23:35    [W:0.085 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site