lkml.org 
[lkml]   [2018]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/15] clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output
On Wed, Nov 28, 2018 at 05:30:07PM +0800, Chen-Yu Tsai wrote:
> On the R40, in addition to a mux between the RTC's own RC oscillator and
> an external 32768 Hz crystal, which are muxed inside the RTC module, the
> CCU also has its own RC oscillator, which runs at around 2 MHz, and can
> be muxed with the LOSC output from the RTC. This muxed output is called
> "SYS 32K" in the module clock diagram, but otherwise referred to as the
> LOSC throughout the CCU documentation.
>
> The RC oscillator is not very accurate, even though it has an undocumented
> calibration function. We really want a precise clock at 32768 Hz,
> instead of something at around 32 KHz. This patch forces the SYS 32K
> clock to use the RTC output as its parent, and doesn't bother
> registering the internal oscillator nor a clock mux.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-11-28 11:26    [W:0.224 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site