lkml.org 
[lkml]   [2018]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 06/15] rtc: sun6i: Add support for different variants
On Wed, Nov 28, 2018 at 05:30:03PM +0800, Chen-Yu Tsai wrote:
> Amongst the Allwinner SoCs that have seen some kind of coverage by the
> linux-sunxi community, whether it be mainline Linux or U-boot support,
> or just available datasheets, most newer chips use the RTC design first
> seen in the A31 (sun6i).
>
> Overall there have been some minor differences. This patch covers the
> following:
>
> - average clock rate of the internal RC oscillator
> + presence of fixed and adjustable prescaler for this clock
> - availability of an external (to the SoC) clock output
>
> One major difference regarding the H6 is the 24 MHz crystal is now
> routed through the RTC, as a digitally compensated oscillator (DCXO).
> This is not covered in this patch and will be supported later.
>
> Other differences are either unrelated to RTC or clock functionality,
> such as boot or crypto related registers, or the driver simply doesn't
> use the feature in question. One example of the latter is the
> calibration function for the RC oscillator. We consider this clock to
> be very bad and avoid using it.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-11-28 11:23    [W:0.224 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site