lkml.org 
[lkml]   [2018]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/5] Staging: iio: adt7316: Add of_device_id table
Date
When the kernel starts up, it kicks off compiled-in drivers
that match “compatible” entries it finds in the device tree.
At a later stage (when /lib/modules is available), all kernel modules
that match “compatible” entries in the device tree are loaded.

But if there is no dt table then there should be a fall back path
with which desired kernel modules can be loaded. Hence, add
of_device_id table in the i2c driver to be able to use when there
is no dt table.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
---

Changes in v2:
- Make the commit message appropriate and assign of_match_table
in the driver structure.

drivers/staging/iio/addac/adt7316-i2c.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/staging/iio/addac/adt7316-i2c.c b/drivers/staging/iio/addac/adt7316-i2c.c
index 473e5e34ec00..41bc4ca008bc 100644
--- a/drivers/staging/iio/addac/adt7316-i2c.c
+++ b/drivers/staging/iio/addac/adt7316-i2c.c
@@ -126,9 +126,22 @@ static const struct i2c_device_id adt7316_i2c_id[] = {

MODULE_DEVICE_TABLE(i2c, adt7316_i2c_id);

+static const struct of_device_id adt7316_of_match[] = {
+ { .compatible = "adi,adt7316" },
+ { .compatible = "adi,adt7317" },
+ { .compatible = "adi,adt7318" },
+ { .compatible = "adi,adt7516" },
+ { .compatible = "adi,adt7517" },
+ { .compatible = "adi,adt7519" },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, adt7316_of_match);
+
static struct i2c_driver adt7316_driver = {
.driver = {
.name = "adt7316",
+ .of_match_table = adt7316_of_match,
.pm = ADT7316_PM_OPS,
},
.probe = adt7316_i2c_probe,
--
2.17.1
\
 
 \ /
  Last update: 2018-11-20 17:53    [W:0.091 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site