lkml.org 
[lkml]   [2018]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] thermal: tsens: Add support for QCS404 platform
Date
Add support for the Qualcomm QCS404 platform that contains v1 of the TSENS
IP. Introduce a fallback binding to handle "v1" functionality.

These patches have been tested on top of 4.20-rc3 + various qcs404-related
DT patches now in Andy's ci-next branch[1].

Changes since v1:
- Change p1 and p2 to be fixed-size arrays
- Refactor DT entries to be sorted by address, Thanks Vinod
- Added Acks

[1] https://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git/log/?h=ci-next

Amit Kucheria (4):
dt: thermal: tsens: Add bindings for qcs404
drivers: thermal: tsens: Add generic support for TSENS v1 IP
arm64: dts: qcom: qcs404: Add tsens controller
arm64: dts: qcom: qcs404: Add thermal zones for each sensor

.../bindings/thermal/qcom-tsens.txt | 3 +
arch/arm64/boot/dts/qcom/qcs404.dtsi | 226 ++++++++++++++++++
drivers/thermal/qcom/Makefile | 2 +-
drivers/thermal/qcom/tsens-v1.c | 196 +++++++++++++++
drivers/thermal/qcom/tsens.c | 3 +
drivers/thermal/qcom/tsens.h | 2 +-
6 files changed, 430 insertions(+), 2 deletions(-)
create mode 100644 drivers/thermal/qcom/tsens-v1.c

--
2.17.1

\
 
 \ /
  Last update: 2018-11-19 13:27    [W:0.027 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site