lkml.org 
[lkml]   [2018]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Documentation: preempt-locking: Use better example
Date
The existing wording implies that the use of spin_unlock whilst irqs are
disabled might trigger a reschedule. However the preemptible() test in
preempt_schedule will prevent a reschedule if irqs are disabled.

Lets improve the clarity of this wording to change the example from
spin_unlock to cond_resched() and cond_resched_lock() as these are
functions that will trigger a reschedule if the preempt count is 0 without
testing that irqs are disabled.

Also remove the 'Last Updated' line as this is not up to date and better
tracked via GIT.

Signed-off-by: Andrew Murray <andrew.murray@arm.com>
---
Documentation/preempt-locking.txt | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/preempt-locking.txt b/Documentation/preempt-locking.txt
index c945062..509f5a4 100644
--- a/Documentation/preempt-locking.txt
+++ b/Documentation/preempt-locking.txt
@@ -3,7 +3,6 @@ Proper Locking Under a Preemptible Kernel: Keeping Kernel Code Preempt-Safe
===========================================================================

:Author: Robert Love <rml@tech9.net>
-:Last Updated: 28 Aug 2002


Introduction
@@ -92,11 +91,12 @@ any locks or interrupts are disabled, since preemption is implicitly disabled
in those cases.

But keep in mind that 'irqs disabled' is a fundamentally unsafe way of
-disabling preemption - any spin_unlock() decreasing the preemption count
-to 0 might trigger a reschedule. A simple printk() might trigger a reschedule.
-So use this implicit preemption-disabling property only if you know that the
-affected codepath does not do any of this. Best policy is to use this only for
-small, atomic code that you wrote and which calls no complex functions.
+disabling preemption - any cond_resched() or cond_resched_lock() might trigger
+a reschedule if the preempt count is 0. A simple printk() might trigger a
+reschedule. So use this implicit preemption-disabling property only if you
+know that the affected codepath does not do any of this. Best policy is to use
+this only for small, atomic code that you wrote and which calls no complex
+functions.

Example::

--
2.7.4
\
 
 \ /
  Last update: 2018-10-08 15:16    [W:0.023 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site