Messages in this thread | | | From | "Doug Smythies" <> | Subject | RE: [PATCH 0/6] cpuidle: menu: Fixes, optimizations and cleanups | Date | Sun, 7 Oct 2018 22:53:55 -0700 |
| |
On 2018.10.03 23:56 Rafael J. Wysocki wrote: > On Tue, Oct 2, 2018 at 11:51 PM Rafael J. Wysocki <rjw@rjwysocki.net> wrote: >> >> Hi All, >> >> This series fixes a couple of issues with the menu governor, optimizes it >> somewhat and makes a couple of cleanups in it. Please refer to the >> patch changelogs for details. >> >> All of the changes in the series are straightforward in my view. The >> first two patches are fixes, the rest is optimizations and cleanups. > > I'm inclined to take this stuff in for 4.20 if nobody has problems > with it, so please have a look if you care (and you should, because > the code in question is run on all tickless systems out there).
Hi Rafael,
I did tests with kernel 4.19-rc6 as a baseline reference and then with 8 of your patches (&8patches in the graphs legend):
cpuidle: menu: Replace data->predicted_us with local variable . as required to get this set of 6 to then apply. This set of 6 patches. cpuidle: poll_state: Revise loop termination condition
Recall I also did some testing in late August [1], with a kernel that was just a few hundred commits before 4.19-rc1. The baseline is now way different. While I don't know why, I bisected the kernel and either made a mistake, or it was:
first bad commit: [06e386a1db54ab6a671e103e929b590f7a88f0e3] Merge tag 'fbdev-v4.19' of https://github.com/bzolnier/linux
Anyway, and for reference, included on some of the graphs is the old data from late August (legend name "4.18+3rjw (Aug test)")
Test 1: A Thomas Ilsche type "powernightmare" test: (forever ((10 times - variable usec sleep) 0.999 seconds sleep) X 40 staggered threads. Where the "variable" was from 0.05 to 5 in steps of 0.05, for the first ~200 minutes of the test. (note: overheads mean that actual loop times are quite different.) And then from 5 to 50 in steps of 1, for the remaining 100 minutes of the test. (Shortened by 900 minutes from the way the test was done in August.) Each step ran for 2 minutes. The system was idle for 1 minute at the start, and a few minutes at the end of the graphs.
The power and idle statistics graphs are here: http://fast.smythies.com/linux-pm/k419/k419-pn-sweep-rjw.htm
Observations:
While the graphs are pretty and such, the only significant difference is the idle state 0 percentages go down a lot with the 8 patches. However the number of idle state 0 entries per minute goes up. To present the same information in a different way a trace was done (at 9 Gigabytes in 2 minutes):
&8patches Idle State 0: Total Entries: 10091412 : time (seconds): 49.447025 Idle State 1: Total Entries: 49332297 : time (seconds): 375.943064 Idle State 2: Total Entries: 311810 : time (seconds): 2.626403
k4.19-rc6 Idle State 0: Total Entries: 9162465 : time (seconds): 70.650566 Idle State 1: Total Entries: 47592671 : time (seconds): 373.625083 Idle State 2: Total Entries: 266212 : time (seconds): 2.278159
Conclusions: Behaves as expected.
Test 2: pipe test 2 CPUs, one core. CPU test:
The average loop times graph is here: http://fast.smythies.com/linux-pm/k419/k419-rjw-pipe-1core.png
The power and idle statistics graphs are here: http://fast.smythies.com/linux-pm/k419/k419-rjw-pipe-1core.htm
Conclusions:
Better performance at the cost of more power with the patch set, but late August had both better performance and less power.
Overall idle entries and exits are about the same, but way way more idle state 0 entries and exits with the patch set.
Supporting: trace summary (note: such a heavy load on the trace system (~6 gigabytes in 2 minutes) costs about 25% in performance):
k4.16-rc6 pipe Idle State 0: Total Entries: 76638 : time (seconds): 0.193166 Idle State 1: Total Entries: 37825999 : time (seconds): 23.886772 Idle State 2: Total Entries: 49 : time (seconds): 0.007908
&8patches Idle State 0: Total Entries: 37632104 : time (seconds): 26.097220 Idle State 1: Total Entries: 397 : time (seconds): 0.020021 Idle State 2: Total Entries: 208 : time (seconds): 0.031052
With rjw 8 patch set (1st col is usecs duration, 2nd col is number of occurrences in 2 minutes):
Idle State: 0 Summary: 0 24401500 1 13153259 2 19807 3 32731 4 802 5 346 6 1554 7 20087 8 1849 9 150 10 9 11 10
Idle State: 1 Summary: 0 29 1 44 2 15 3 45 4 5 5 26 6 2 7 24 8 4 9 21 10 6 11 39 12 15 13 38 14 14 15 27 16 10 17 12 18 1 35 1 89 1 135 1 678 1 991 2 995 3 996 1 997 8 998 1 999 1
Kernel 4.19-rc6 reference:
Idle State: 0 Summary: 0 17212 1 7516 2 34737 3 14763 4 2312 5 74 6 3 7 3 8 3 9 4 10 5 11 5 40 1
Idle State: 1 Summary: 0 36073601 1 1662728 2 67985 3 106 4 22 5 8 6 2214 7 11037 8 7110 9 1156 10 1 11 1 13 2 23 1 29 1 99 1 554 1 620 1 846 1 870 1 936 1 944 1 963 1 972 1 989 1 991 1 993 1 994 1 995 2 996 2 997 6 998 3
Test 3: iperf test:
Method: Be an iperf client to 3 servers at once. Packets are small on purpose, we want the highest frequency of packets, not fastest payload delivery.
Performance:
Kernel 4.19: 79.9 + 23.5 + 32.8 = 136.2 Mbits/Sec. &8patches: 78.6 + 23.2 + 33.0 = 134.8 Mbits/Sec.
Kernel 4.19 average processor package power: 12.73 watts. &8patches average processor package power: 12.99 watts.
The power and idle statistics graphs are here: http://fast.smythies.com/linux-pm/k419/k419-iperf.htm
Conclusion:
Marginally less performance and marginally more power used with the 8 patch set.
Test 4: long idle test
Just under 8 hours of at idle. (no pretty graphs)
Averages (per minute):
Kernel 4.19: % time in idle state 0: 1.76811E-05 % time in idle state 1: 0.001501241 % time in idle state 2: 0.002349672 % time in idle state 3: 0.000432757 % time in idle state 4: 100.0047484 Idle state 0 entries: 2.470715835 Idle state 1 entries: 27.84164859 Idle state 2 entries: 26.02169197 Idle state 3 entries: 4.600867679 Idle state 4 entries: 1487.260304 Processor package power: 3.668
&8patches: % time in idle state 0: 4.76854E-06 % time in idle state 1: 0.000752083 % time in idle state 2: 0.001242119 % time in idle state 3: 0.000408944 % time in idle state 4: 100.0065453 Idle state 0 entries: 4.213483146 Idle state 1 entries: 16.42696629 Idle state 2 entries: 16.75730337 Idle state 3 entries: 4.541573034 Idle state 4 entries: 1464.083146 Processor package power: 3.667
Conclusion: O.K.
Test 5: intel-cpufreq schedutil specific test:
Recall previously there were some significant improvements with this governor and the idle changes earlier this year. (no pretty graphs)
Conclusion: No detectable differences.
(sorry for the lack of detail here.)
[1] https://marc.info/?l=linux-pm&m=153531591826719&w=2
... Doug
| |