Messages in this thread Patch in this message | | | Date | Mon, 22 Oct 2018 14:29:01 -0600 | Subject | [PATCH] thermal: add ratelimited thermal and power logging | From | Ross Zwisler <> |
| |
From: Ricky Liang <jcliang@chromium.org>
Add thermal logs in devfreq_cooling and cpu_cooling. Also add logging to power_allocator when it starts to control power.
These changes can lead to excessive log spam when running up against thermal limits, so have this logging ratelimited to allow only 1 log each 30 seconds from each of those subsystems.
Signed-off-by: Ricky Liang <jcliang@chromium.org> Co-authored-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Stephen Barber <smbarber@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> [ rez: squashed initial implementation & fixes, updated changelog for upstream. ] Signed-off-by: Ross Zwisler <zwisler@google.com> --- drivers/thermal/cpu_cooling.c | 16 ++++++++++++++++ drivers/thermal/devfreq_cooling.c | 12 ++++++++++++ drivers/thermal/power_allocator.c | 17 +++++++++++++++++ 3 files changed, 45 insertions(+)
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index dfd23245f778a..d8d1855d7d991 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -31,9 +31,17 @@ #include <linux/slab.h> #include <linux/cpu.h> #include <linux/cpu_cooling.h> +#include <linux/ratelimit.h> #include <trace/events/thermal.h> +static DEFINE_RATELIMIT_STATE(cpu_cooling_ratelimit_state, 30 * HZ, 1); + +static int cpu_cooling_ratelimit(void) +{ + return __ratelimit(&cpu_cooling_ratelimit_state); +} + /* * Cooling state <-> CPUFreq frequency * @@ -389,6 +397,7 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, { struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; unsigned int clip_freq; + struct device *cpu_dev; /* Request state should be less than max_level */ if (WARN_ON(state > cpufreq_cdev->max_level)) @@ -404,6 +413,13 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, cpufreq_update_policy(cpufreq_cdev->policy->cpu); + if (cpu_cooling_ratelimit()) { + cpu_dev = get_cpu_device(cpufreq_cdev->policy->cpu); + dev_info(cpu_dev, + "Cooling state set to %lu. New max freq = %u\n", + state, clip_freq); + } + return 0; } diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c index ef59256887ff6..f95c7f513f05a 100644 --- a/drivers/thermal/devfreq_cooling.c +++ b/drivers/thermal/devfreq_cooling.c @@ -25,6 +25,7 @@ #include <linux/slab.h> #include <linux/pm_opp.h> #include <linux/thermal.h> +#include <linux/ratelimit.h> #include <trace/events/thermal.h> @@ -32,6 +33,13 @@ static DEFINE_IDA(devfreq_ida); +static DEFINE_RATELIMIT_STATE(devfreq_cooling_ratelimit_state, 30 * HZ, 1); + +static int devfreq_cooling_ratelimit(void) +{ + return __ratelimit(&devfreq_cooling_ratelimit_state); +} + /** * struct devfreq_cooling_device - Devfreq cooling device * @id: unique integer value corresponding to each @@ -150,6 +158,10 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev, dfc->cooling_state = state; + if (devfreq_cooling_ratelimit()) + dev_info(dev, "Cooling state set to %lu. New max freq = %u\n", + state, dfc->freq_table[state]); + return 0; } diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c index 3055f9a12a170..5140a07fe60aa 100644 --- a/drivers/thermal/power_allocator.c +++ b/drivers/thermal/power_allocator.c @@ -15,6 +15,7 @@ #define pr_fmt(fmt) "Power allocator: " fmt +#include <linux/ratelimit.h> #include <linux/rculist.h> #include <linux/slab.h> #include <linux/thermal.h> @@ -30,6 +31,13 @@ #define int_to_frac(x) ((x) << FRAC_BITS) #define frac_to_int(x) ((x) >> FRAC_BITS) +static DEFINE_RATELIMIT_STATE(power_allocator_ratelimit_state, 30 * HZ, 1); + +static int power_allocator_ratelimit(void) +{ + return __ratelimit(&power_allocator_ratelimit_state); +} + /** * mul_frac() - multiply two fixed-point numbers * @x: first multiplicand @@ -443,6 +451,15 @@ static int allocate_power(struct thermal_zone_device *tz, max_allocatable_power, tz->temperature, control_temp - tz->temperature); + if (total_granted_power < total_req_power && + power_allocator_ratelimit()) { + dev_info(&tz->device, "Controlling power: control_temp=%d " + "last_temp=%d, curr_temp=%d total_requested_power=%d " + "total_granted_power=%d\n", control_temp, + tz->last_temperature, tz->temperature, + total_req_power, total_granted_power); + } + kfree(req_power); unlock: mutex_unlock(&tz->lock); -- 2.19.1.568.g152ad8e336-goog
| |