lkml.org 
[lkml]   [2018]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/5] mfd: lochnagar: Add initial binding documentation
Date
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Rob Herring <robh@kernel.org>
---

Changes since v2:
- Used vendor prefix on aif-master and aif-slave
- Used -gpios instead of -gpio in example DT
- Used - rather than _ on node names in example DT
- Removed some clocks from the clock DT binding doc since they are
now being registered purely through DT as fixed clocks

Thanks,
Charles

.../devicetree/bindings/mfd/cirrus,lochnagar.txt | 230 +++++++++++++++++++++
include/dt-bindings/clk/lochnagar.h | 26 +++
include/dt-bindings/pinctrl/lochnagar.h | 132 ++++++++++++
3 files changed, 388 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
create mode 100644 include/dt-bindings/clk/lochnagar.h
create mode 100644 include/dt-bindings/pinctrl/lochnagar.h

diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
new file mode 100644
index 0000000000000..4bed850aa7101
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
@@ -0,0 +1,230 @@
+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform. Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+Also see these documents for generic binding information:
+ [1] GPIO : ../gpio/gpio.txt
+ [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
+ [3] Clock : ../clock/clock-bindings.txt
+ [4] Regulator: ../regulator/regulator.txt
+
+And these for relevant defines:
+ [5] include/dt-bindings/pinctrl/lochnagar.h
+ [6] include/dt-bindings/clock/lochnagar.h
+
+Required properties:
+
+ - compatible : One of the following strings:
+ "cirrus,lochnagar1"
+ "cirrus,lochnagar2"
+
+ - reg : I2C slave address
+
+ - gpio-controller : Indicates this device is a GPIO controller.
+ - #gpio-cells : Must be 2. The first cell is the pin number, see
+ [5] for available pins and the second cell is used to specify
+ optional parameters, see [1].
+ - gpio-ranges : Range of pins managed by the GPIO controller, see
+ [1]. Both the GPIO and Pinctrl base should be set to zero and the
+ count to the appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define,
+ see [5].
+
+ - reset-gpios : Reset line to the Lochnagar, see [1].
+
+ - #clock-cells : Must be 1. The first cell indicates the clock
+ number, see [6] for available clocks and [3].
+
+ - pinctrl-names : A pinctrl state named "default" must be defined.
+ - pinctrl-0 : A phandle to the default pinctrl state.
+
+ - SYSVDD-supply: Primary power supply for the Lochnagar.
+
+Optional properties:
+
+ - present-gpios : Host present line, indicating the presence of a
+ host system, see [1]. This can be omitted if the present line is
+ tied in hardware.
+
+ - clocks : Must contain an entry for each clock in clock-names.
+ - clock-names : May contain entries for each of the following
+ clocks:
+ - ln-cdc-clkout : Output clock from CODEC card.
+ - ln-dsp-clkout : Output clock from DSP card.
+ - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
+ input audio clocks from host system.
+ - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
+ external connector.
+ - ln-spdif-clkout : Optional input audio clock from SPDIF.
+ - ln-adat-clkout : Optional input audio clock from ADAT.
+
+ - assigned-clocks : A list of Lochnagar clocks to be reparented, see
+ [6] for available clocks.
+ - assigned-clock-parents : Parents to be assigned to the clocks
+ listed in "assigned-clocks".
+
+ - MICBIAS1-supply, MICBIAS2-supply: Regulator supplies for the
+ MICxVDD outputs, supplying the digital microphones, normally
+ supplied from the attached CODEC.
+
+Required sub-nodes:
+
+The pin configurations are defined as a child of the pinctrl states
+node, see [2]. Each sub-node can have the following properties:
+ - groups : A list of groups to select (either this or "pins" must be
+ specified), available groups:
+ codec-aif1, codec-aif2, codec-aif3, dsp-aif1, dsp-aif2, psia1,
+ psia2, gf-aif1, gf-aif2, gf-aif3, gf-aif4, spdif-aif, usb-aif1,
+ usb-aif2, adat-aif, soundcard-aif
+ - pins : A list of pin names to select (either this or "groups" must
+ be specified), available pins:
+ fgpa-gpio1, fgpa-gpio2, fgpa-gpio3, fgpa-gpio4, fgpa-gpio5,
+ fgpa-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4,
+ codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1,
+ dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2,
+ gf-gpio3, gf-gpio7, codec-aif1-bclk, codec-aif1-rxdat,
+ codec-aif1-lrclk, codec-aif1-txdat, codec-aif2-bclk,
+ codec-aif2-rxdat, codec-aif2-lrclk, codec-aif2-txdat,
+ codec-aif3-bclk, codec-aif3-rxdat, codec-aif3-lrclk,
+ codec-aif3-txdat, dsp-aif1-bclk, dsp-aif1-rxdat, dsp-aif1-lrclk,
+ dsp-aif1-txdat, dsp-aif2-bclk, dsp-aif2-rxdat,
+ dsp-aif2-lrclk, dsp-aif2-txdat, psia1-bclk, psia1-rxdat,
+ psia1-lrclk, psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
+ psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat, gf-aif3-lrclk,
+ gf-aif3-txdat, gf-aif4-bclk, gf-aif4-rxdat, gf-aif4-lrclk,
+ gf-aif4-txdat, gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
+ gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat, gf-aif2-lrclk,
+ gf-aif2-txdat, dsp-uart1-rx, dsp-uart1-tx, dsp-uart2-rx,
+ dsp-uart2-tx, gf-uart2-rx, gf-uart2-tx, usb-uart-rx,
+ codec-pdmclk1, codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
+ codec-dmicclk1, codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
+ codec-dmicclk3, codec-dmicdat3, codec-dmicclk4, codec-dmicdat4,
+ dsp-dmicclk1, dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
+ i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, dsp-standby,
+ codec-mclk1, codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
+ gf-gpio1, gf-gpio5, dsp-gpio20, led1, led2
+ - function : The mux function to select, available functions:
+ aif, fgpa-gpio1, fgpa-gpio2, fgpa-gpio3, fgpa-gpio4, fgpa-gpio5,
+ fgpa-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4,
+ codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1,
+ dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2,
+ gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5, dsp-gpio20, codec-clkout,
+ dsp-clkout, pmic-32k, spdif-clkout, clk-12m288, clk-11m2986,
+ clk-24m576, clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
+ gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1, codec-mclk2,
+ dsp-clkin, psia1-mclk, psia2-mclk, spdif-mclk, codec-irq,
+ codec-reset, dsp-reset, dsp-irq, dsp-standby, codec-pdmclk1,
+ codec-pdmdat1, codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
+ codec-dmicdat1, codec-dmicclk2, codec-dmicdat2, codec-dmicclk3,
+ codec-dmicdat3, codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
+ dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
+ dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx, gf-uart2-rx,
+ gf-uart2-tx, usb-uart-rx, usb-uart-tx, i2c2-scl, i2c2-sda,
+ i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, gpio, spdif-aif, psia1,
+ psia1-bclk, psia1-lrclk, psia1-rxdat, psia1-txdat, psia2,
+ psia2-bclk, psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
+ codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
+ codec-aif1-txdat, codec-aif2, codec-aif2-bclk, codec-aif2-lrclk,
+ codec-aif2-rxdat, codec-aif2-txdat, codec-aif3, codec-aif3-bclk,
+ codec-aif3-lrclk, codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
+ dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat, dsp-aif1-txdat,
+ dsp-aif2, dsp-aif2-bclk, dsp-aif2-lrclk, dsp-aif2-rxdat,
+ dsp-aif2-txdat, gf-aif3, gf-aif3-bclk, gf-aif3-lrclk,
+ gf-aif3-rxdat, gf-aif3-txdat, gf-aif4, gf-aif4-bclk,
+ gf-aif4-lrclk, gf-aif4-rxdat, gf-aif4-txdat, gf-aif1,
+ gf-aif1-bclk, gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat,
+ gf-aif2, gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
+ gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif, soundcard-aif,
+
+ - aif-master : Specifies that an AIF group will be used as a master
+ interface (either this or aif-slave is required if a group is
+ being muxed to an AIF)
+ - aif-slave : Specifies that an AIF group will be used as a slave
+ interface (either this or aif-master is required if a group is
+ being muxed to an AIF)
+
+Optional sub-nodes:
+
+ - VDDCORE : Initialisation data for the VDDCORE regulator, which
+ supplies the CODECs digital core if it has no build regulator for that
+ purpose.
+
+ - MICVDD : Initialisation data for the MICVDD regulator, which
+ supplies the CODECs MICVDD.
+ - MIC1VDD, MIC2VDD : Initialisation data for the MICxVDD supplies.
+ Optional Properties:
+ - cirrus,micbias-input : A property selecting which of the CODEC
+ minicard micbias outputs should be used, valid values are 1 - 4.
+
+ - VDD1V8 : Recommended fixed regulator for the VDD1V8 regulator, which supplies the
+ CODECs analog and 1.8V digital supplies.
+ Required Properties:
+ - compatible : Should be set to "regulator-fixed"
+ - regulator-min-microvolt : Should be set to 1.8V
+ - regulator-max-microvolt : Should be set to 1.8V
+ - regulator-boot-on
+ - regulator-always-on
+ - vin-supply : Should be set to same supply as SYSVDD
+
+Example:
+lochnagar: lochnagar@22 {
+ compatible = "cirrus,lochnagar2";
+ reg = <0x22>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lochnagar 0 0 110>;
+
+ reset-gpios = <&gpio0 55 0>;
+ present-gpios = <&gpio0 60 0>;
+
+ #clock-cells = <1>;
+
+ clocks = <&clk-audio>;
+ clock-names = "ln-gf-mclk2";
+
+ assigned-clocks = <&lochnagar LOCHNAGAR_CDC_MCLK1>,
+ <&lochnagar LOCHNAGAR_CDC_MCLK2>;
+ assigned-clock-parents = <&clk-audio>,
+ <&lochnagar LOCHNAGAR_PMIC_32K>;
+
+ SYSVDD-supply = <&wallvdd>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pin-settings>;
+
+ pin-settings: pin-settings {
+ ap-aif {
+ aif-slave;
+ groups = "gf-aif1";
+ function = "codec-aif3";
+ };
+ codec-aif {
+ aif-master;
+ groups = "codec-aif3";
+ function = "gf-aif1";
+ };
+ };
+
+ lochnagar-micvdd: MICVDD {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ lochnagar-vdd1v8: VDD1V8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDD1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+
+ vin-supply = <&wallvdd>;
+ };
+};
diff --git a/include/dt-bindings/clk/lochnagar.h b/include/dt-bindings/clk/lochnagar.h
new file mode 100644
index 0000000000000..8fa20551ff171
--- /dev/null
+++ b/include/dt-bindings/clk/lochnagar.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device Tree defines for Lochnagar clocking
+ *
+ * Copyright (c) 2017-2018 Cirrus Logic, Inc. and
+ * Cirrus Logic International Semiconductor Ltd.
+ *
+ * Author: Charles Keepax <ckeepax@opensource.cirrus.com>
+ */
+
+#ifndef DT_BINDINGS_CLK_LOCHNAGAR_H
+#define DT_BINDINGS_CLK_LOCHNAGAR_H
+
+#define LOCHNAGAR_CDC_MCLK1 0
+#define LOCHNAGAR_CDC_MCLK2 1
+#define LOCHNAGAR_DSP_CLKIN 2
+#define LOCHNAGAR_GF_CLKOUT1 3
+#define LOCHNAGAR_GF_CLKOUT2 4
+#define LOCHNAGAR_PSIA1_MCLK 5
+#define LOCHNAGAR_PSIA2_MCLK 6
+#define LOCHNAGAR_SPDIF_MCLK 7
+#define LOCHNAGAR_ADAT_MCLK 8
+#define LOCHNAGAR_SOUNDCARD_MCLK 9
+#define LOCHNAGAR_SPDIF_CLKOUT 10
+
+#endif
diff --git a/include/dt-bindings/pinctrl/lochnagar.h b/include/dt-bindings/pinctrl/lochnagar.h
new file mode 100644
index 0000000000000..644760bf5725b
--- /dev/null
+++ b/include/dt-bindings/pinctrl/lochnagar.h
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device Tree defines for Lochnagar pinctrl
+ *
+ * Copyright (c) 2018 Cirrus Logic, Inc. and
+ * Cirrus Logic International Semiconductor Ltd.
+ *
+ * Author: Charles Keepax <ckeepax@opensource.cirrus.com>
+ */
+
+#ifndef DT_BINDINGS_PINCTRL_LOCHNAGAR_H
+#define DT_BINDINGS_PINCTRL_LOCHNAGAR_H
+
+#define LOCHNAGAR1_PIN_CDC_RESET 0
+#define LOCHNAGAR1_PIN_DSP_RESET 1
+#define LOCHNAGAR1_PIN_CDC_CIF1MODE 2
+#define LOCHNAGAR1_PIN_NUM_GPIOS 3
+
+#define LOCHNAGAR2_PIN_CDC_RESET 0
+#define LOCHNAGAR2_PIN_DSP_RESET 1
+#define LOCHNAGAR2_PIN_CDC_CIF1MODE 2
+#define LOCHNAGAR2_PIN_CDC_LDOENA 3
+#define LOCHNAGAR2_PIN_SPDIF_HWMODE 4
+#define LOCHNAGAR2_PIN_SPDIF_RESET 5
+#define LOCHNAGAR2_PIN_FPGA_GPIO1 6
+#define LOCHNAGAR2_PIN_FPGA_GPIO2 7
+#define LOCHNAGAR2_PIN_FPGA_GPIO3 8
+#define LOCHNAGAR2_PIN_FPGA_GPIO4 9
+#define LOCHNAGAR2_PIN_FPGA_GPIO5 10
+#define LOCHNAGAR2_PIN_FPGA_GPIO6 11
+#define LOCHNAGAR2_PIN_CDC_GPIO1 12
+#define LOCHNAGAR2_PIN_CDC_GPIO2 13
+#define LOCHNAGAR2_PIN_CDC_GPIO3 14
+#define LOCHNAGAR2_PIN_CDC_GPIO4 15
+#define LOCHNAGAR2_PIN_CDC_GPIO5 16
+#define LOCHNAGAR2_PIN_CDC_GPIO6 17
+#define LOCHNAGAR2_PIN_CDC_GPIO7 18
+#define LOCHNAGAR2_PIN_CDC_GPIO8 19
+#define LOCHNAGAR2_PIN_DSP_GPIO1 20
+#define LOCHNAGAR2_PIN_DSP_GPIO2 21
+#define LOCHNAGAR2_PIN_DSP_GPIO3 22
+#define LOCHNAGAR2_PIN_DSP_GPIO4 23
+#define LOCHNAGAR2_PIN_DSP_GPIO5 24
+#define LOCHNAGAR2_PIN_DSP_GPIO6 25
+#define LOCHNAGAR2_PIN_GF_GPIO2 26
+#define LOCHNAGAR2_PIN_GF_GPIO3 27
+#define LOCHNAGAR2_PIN_GF_GPIO7 28
+#define LOCHNAGAR2_PIN_CDC_AIF1_BCLK 29
+#define LOCHNAGAR2_PIN_CDC_AIF1_RXDAT 30
+#define LOCHNAGAR2_PIN_CDC_AIF1_LRCLK 31
+#define LOCHNAGAR2_PIN_CDC_AIF1_TXDAT 32
+#define LOCHNAGAR2_PIN_CDC_AIF2_BCLK 33
+#define LOCHNAGAR2_PIN_CDC_AIF2_RXDAT 34
+#define LOCHNAGAR2_PIN_CDC_AIF2_LRCLK 35
+#define LOCHNAGAR2_PIN_CDC_AIF2_TXDAT 36
+#define LOCHNAGAR2_PIN_CDC_AIF3_BCLK 37
+#define LOCHNAGAR2_PIN_CDC_AIF3_RXDAT 38
+#define LOCHNAGAR2_PIN_CDC_AIF3_LRCLK 39
+#define LOCHNAGAR2_PIN_CDC_AIF3_TXDAT 40
+#define LOCHNAGAR2_PIN_DSP_AIF1_BCLK 41
+#define LOCHNAGAR2_PIN_DSP_AIF1_RXDAT 42
+#define LOCHNAGAR2_PIN_DSP_AIF1_LRCLK 43
+#define LOCHNAGAR2_PIN_DSP_AIF1_TXDAT 44
+#define LOCHNAGAR2_PIN_DSP_AIF2_BCLK 45
+#define LOCHNAGAR2_PIN_DSP_AIF2_RXDAT 46
+#define LOCHNAGAR2_PIN_DSP_AIF2_LRCLK 47
+#define LOCHNAGAR2_PIN_DSP_AIF2_TXDAT 48
+#define LOCHNAGAR2_PIN_PSIA1_BCLK 49
+#define LOCHNAGAR2_PIN_PSIA1_RXDAT 50
+#define LOCHNAGAR2_PIN_PSIA1_LRCLK 51
+#define LOCHNAGAR2_PIN_PSIA1_TXDAT 52
+#define LOCHNAGAR2_PIN_PSIA2_BCLK 53
+#define LOCHNAGAR2_PIN_PSIA2_RXDAT 54
+#define LOCHNAGAR2_PIN_PSIA2_LRCLK 55
+#define LOCHNAGAR2_PIN_PSIA2_TXDAT 56
+#define LOCHNAGAR2_PIN_GF_AIF3_BCLK 57
+#define LOCHNAGAR2_PIN_GF_AIF3_RXDAT 58
+#define LOCHNAGAR2_PIN_GF_AIF3_LRCLK 59
+#define LOCHNAGAR2_PIN_GF_AIF3_TXDAT 60
+#define LOCHNAGAR2_PIN_GF_AIF4_BCLK 61
+#define LOCHNAGAR2_PIN_GF_AIF4_RXDAT 62
+#define LOCHNAGAR2_PIN_GF_AIF4_LRCLK 63
+#define LOCHNAGAR2_PIN_GF_AIF4_TXDAT 64
+#define LOCHNAGAR2_PIN_GF_AIF1_BCLK 65
+#define LOCHNAGAR2_PIN_GF_AIF1_RXDAT 66
+#define LOCHNAGAR2_PIN_GF_AIF1_LRCLK 67
+#define LOCHNAGAR2_PIN_GF_AIF1_TXDAT 68
+#define LOCHNAGAR2_PIN_GF_AIF2_BCLK 69
+#define LOCHNAGAR2_PIN_GF_AIF2_RXDAT 70
+#define LOCHNAGAR2_PIN_GF_AIF2_LRCLK 71
+#define LOCHNAGAR2_PIN_GF_AIF2_TXDAT 72
+#define LOCHNAGAR2_PIN_DSP_UART1_RX 73
+#define LOCHNAGAR2_PIN_DSP_UART1_TX 74
+#define LOCHNAGAR2_PIN_DSP_UART2_RX 75
+#define LOCHNAGAR2_PIN_DSP_UART2_TX 76
+#define LOCHNAGAR2_PIN_GF_UART2_RX 77
+#define LOCHNAGAR2_PIN_GF_UART2_TX 78
+#define LOCHNAGAR2_PIN_USB_UART_RX 79
+#define LOCHNAGAR2_PIN_CDC_PDMCLK1 80
+#define LOCHNAGAR2_PIN_CDC_PDMDAT1 81
+#define LOCHNAGAR2_PIN_CDC_PDMCLK2 82
+#define LOCHNAGAR2_PIN_CDC_PDMDAT2 83
+#define LOCHNAGAR2_PIN_CDC_DMICCLK1 84
+#define LOCHNAGAR2_PIN_CDC_DMICDAT1 85
+#define LOCHNAGAR2_PIN_CDC_DMICCLK2 86
+#define LOCHNAGAR2_PIN_CDC_DMICDAT2 87
+#define LOCHNAGAR2_PIN_CDC_DMICCLK3 88
+#define LOCHNAGAR2_PIN_CDC_DMICDAT3 89
+#define LOCHNAGAR2_PIN_CDC_DMICCLK4 90
+#define LOCHNAGAR2_PIN_CDC_DMICDAT4 91
+#define LOCHNAGAR2_PIN_DSP_DMICCLK1 92
+#define LOCHNAGAR2_PIN_DSP_DMICDAT1 93
+#define LOCHNAGAR2_PIN_DSP_DMICCLK2 94
+#define LOCHNAGAR2_PIN_DSP_DMICDAT2 95
+#define LOCHNAGAR2_PIN_I2C2_SCL 96
+#define LOCHNAGAR2_PIN_I2C2_SDA 97
+#define LOCHNAGAR2_PIN_I2C3_SCL 98
+#define LOCHNAGAR2_PIN_I2C3_SDA 99
+#define LOCHNAGAR2_PIN_I2C4_SCL 100
+#define LOCHNAGAR2_PIN_I2C4_SDA 101
+#define LOCHNAGAR2_PIN_DSP_STANDBY 102
+#define LOCHNAGAR2_PIN_CDC_MCLK1 103
+#define LOCHNAGAR2_PIN_CDC_MCLK2 104
+#define LOCHNAGAR2_PIN_DSP_CLKIN 105
+#define LOCHNAGAR2_PIN_PSIA1_MCLK 106
+#define LOCHNAGAR2_PIN_PSIA2_MCLK 107
+#define LOCHNAGAR2_PIN_GF_GPIO1 108
+#define LOCHNAGAR2_PIN_GF_GPIO5 109
+#define LOCHNAGAR2_PIN_DSP_GPIO20 110
+#define LOCHNAGAR2_PIN_NUM_GPIOS 111
+
+#endif
--
2.11.0
\
 
 \ /
  Last update: 2018-10-19 11:51    [W:0.112 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site