Messages in this thread Patch in this message | | | From | Lukasz Luba <> | Subject | [PATCH 08/11] DT: arm: exynos4: add support for thermal trip irq-mode | Date | Tue, 16 Oct 2018 16:56:19 +0200 |
| |
This patch adds support for new flash which indicates that trip point triggers irq when temperature is met. Exynos5433 supports 8 trip point which will trigger irq. Above that number other trip points should be registered without 'irq-mode' flag. That will force the thermal framework to start polling the temperature sensor under configured conditions and handle the trip point.
Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> --- arch/arm/boot/dts/exynos4-cpu-thermal.dtsi | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi index 021d9fc..5e07289 100644 --- a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi @@ -17,22 +17,26 @@ thermal-zones { cpu_alert0: cpu-alert-0 { temperature = <70000>; /* millicelsius */ hysteresis = <10000>; /* millicelsius */ - type = "active"; + type = "passive"; + irq-mode; }; cpu_alert1: cpu-alert-1 { temperature = <95000>; /* millicelsius */ hysteresis = <10000>; /* millicelsius */ - type = "active"; + type = "passive"; + irq-mode; }; cpu_alert2: cpu-alert-2 { temperature = <110000>; /* millicelsius */ hysteresis = <10000>; /* millicelsius */ - type = "active"; + type = "passive"; + irq-mode; }; cpu_crit0: cpu-crit-0 { temperature = <120000>; /* millicelsius */ hysteresis = <0>; /* millicelsius */ type = "critical"; + irq-mode; }; }; cooling-maps { -- 2.7.4
| |