lkml.org 
[lkml]   [2018]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] spi: Make GPIO CSs honour the SPI_NO_CS flag
Date
The SPI configuration state includes an SPI_NO_CS flag that disables
all CS line manipulation, for applications that want to manage their
own chip selects. However, this flag is ignored by the GPIO CS code
in the SPI framework.

Correct this omission with a trivial patch.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
drivers/spi/spi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 84dfef4..b1d88fe 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -729,7 +729,9 @@ static void spi_set_cs(struct spi_device *spi, bool enable)
enable = !enable;

if (gpio_is_valid(spi->cs_gpio)) {
- gpio_set_value(spi->cs_gpio, !enable);
+ /* Honour the SPI_NO_CS flag */
+ if (!(spi->mode & SPI_NO_CS))
+ gpio_set_value(spi->cs_gpio, !enable);
/* Some SPI masters need both GPIO CS & slave_select */
if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
spi->controller->set_cs)
--
2.7.4
\
 
 \ /
  Last update: 2018-10-12 11:24    [W:1.186 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site