Messages in this thread | | | Subject | Re: [PATCH 5/7] mfd: ds90ux9xx: add I2C bridge/alias and link connection driver | From | Vladimir Zapolskiy <> | Date | Fri, 12 Oct 2018 10:32:32 +0300 |
| |
Hi Lee,
On 10/12/2018 09:04 AM, Lee Jones wrote: > On Tue, 09 Oct 2018, Vladimir Zapolskiy wrote: > >> From: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> >> >> The change adds TI DS90Ux9xx I2C bridge/alias subdevice driver and >> FPD Link connection handling mechanism. >> >> Access to I2C devices connected to a remote de-/serializer is done in >> a transparent way, on established link detection event such devices >> are registered on an I2C bus, which serves a local de-/serializer IC. >> >> The development of the driver was a collaborative work, the >> contribution done by Balasubramani Vivekanandan includes: >> * original simplistic implementation of the driver, >> * support of implicitly specified devices in device tree, >> * support of multiple FPD links for TI DS90Ux9xx, >> * other kind of valuable review comments, clean-ups and fixes. >> >> Also Steve Longerbeam made the following changes: >> * clear address maps after linked device removal, >> * disable pass-through in disconnection, >> * qualify locked status with non-zero remote address. >> >> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> >> --- >> drivers/mfd/Kconfig | 8 + >> drivers/mfd/Makefile | 1 + >> drivers/mfd/ds90ux9xx-i2c-bridge.c | 764 +++++++++++++++++++++++++++++ >> 3 files changed, 773 insertions(+) >> create mode 100644 drivers/mfd/ds90ux9xx-i2c-bridge.c > > Shouldn't this live in drivers/i2c?
no, the driver is not for an I2C controller of any kind, and the driver does not register itself in the I2C subsystem by calling i2c_add_adapter() or i2c_add_numbered_adapter() or i2c_mux_add_adapter() etc, this topic was discussed with Wolfram also.
Formally the driver converts the managed IC into a multi-address I2C slave device, I understand that it does not sound like a well suited driver for MFD, but ds90ux9xx-core.c and ds90ux9xx-i2c-bridge.c drivers are quite tightly coupled.
-- Best wishes, Vladimir
| |