lkml.org 
[lkml]   [2018]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/7] mfd: ds90ux9xx: add I2C bridge/alias and link connection driver
On Tue, 09 Oct 2018, Vladimir Zapolskiy wrote:

> From: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
>
> The change adds TI DS90Ux9xx I2C bridge/alias subdevice driver and
> FPD Link connection handling mechanism.
>
> Access to I2C devices connected to a remote de-/serializer is done in
> a transparent way, on established link detection event such devices
> are registered on an I2C bus, which serves a local de-/serializer IC.
>
> The development of the driver was a collaborative work, the
> contribution done by Balasubramani Vivekanandan includes:
> * original simplistic implementation of the driver,
> * support of implicitly specified devices in device tree,
> * support of multiple FPD links for TI DS90Ux9xx,
> * other kind of valuable review comments, clean-ups and fixes.
>
> Also Steve Longerbeam made the following changes:
> * clear address maps after linked device removal,
> * disable pass-through in disconnection,
> * qualify locked status with non-zero remote address.
>
> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
> ---
> drivers/mfd/Kconfig | 8 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/ds90ux9xx-i2c-bridge.c | 764 +++++++++++++++++++++++++++++
> 3 files changed, 773 insertions(+)
> create mode 100644 drivers/mfd/ds90ux9xx-i2c-bridge.c

Shouldn't this live in drivers/i2c?

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2018-10-12 08:05    [W:0.437 / U:4.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site