lkml.org 
[lkml]   [2018]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net-next v2 0/4] net: mvpp2: 1000BaseX and 2000BaseX support
Date
Hi all,

This series adds 1000BaseX and 2500BaseX support to the Marvell PPv2
driver. In order to use it, the 2.5 SGMII mode is added in the Marvell
common PHY driver (cp110-comphy).

This was tested on a mcbin.

All patches should probably go through net-next as patch 4/4 depends on
patch 1/4 to build and work.

Please note the two mvpp2 patches do not conflict with the ACPI series
v2 Marcin sent a few days ago, and the two series can be processed in
parallel. (Marcin is aware of me sending this series).

Thanks!
Antoine

Since v1:
- s/PHY_MODE_SGMII_2_5G/PHY_MODE_2500SGMII/
- Fixed a build error in 'net: mvpp2: 1000baseX support' (which was solved in
the 2500baseX support one, but the bisection was broken).
- Removed the dt patches, as the fourth network interface on the mcbin also
needs PHYLINK support in the PPv2 driver to be correctly supported.

Antoine Tenart (4):
phy: add 2.5G SGMII mode to the phy_mode enum
phy: cp110-comphy: 2.5G SGMII mode
net: mvpp2: 1000baseX support
net: mvpp2: 2500baseX support

drivers/net/ethernet/marvell/mvpp2.c | 67 +++++++++++++++++++++++-----
drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 17 +++++--
include/linux/phy/phy.h | 1 +
3 files changed, 72 insertions(+), 13 deletions(-)

--
2.14.3

\
 
 \ /
  Last update: 2018-01-03 16:11    [W:0.044 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site