lkml.org 
[lkml]   [2018]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/1] usb: xhci: do not create and register shared_hcd when USB3.0 is disabled
Date
From: Tung Nguyen <tunguyen@apm.com>

Currently, hcd->shared_hcd always creates and registers to the usb-core.
If, for some reasons, USB3 downstream port is disabled, no roothub port for
USB3.0 is found. This causes kernel to display an error:
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
This patch checks and registers shared_hcd if USB3.0 downstream
port is available.

Signed-off-by: Tung Nguyen <tunguyen@apm.com>
---
drivers/usb/host/xhci-plat.c | 9 ++++++---
drivers/usb/host/xhci.c | 13 +++++++++++++
2 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 6f03830..bdb3975 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -293,9 +293,12 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;

- ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
- if (ret)
- goto dealloc_usb2_hcd;
+ /* Just add the shared_hcd when USB3.0 downstream port is available */
+ if (xhci->num_usb3_ports > 0) {
+ ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
+ if (ret)
+ goto dealloc_usb2_hcd;
+ }

device_enable_async_suspend(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 1eeb339..9d3b1ab 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -611,6 +611,19 @@ int xhci_run(struct usb_hcd *hcd)
if (ret)
xhci_free_command(xhci, command);
}
+ /*
+ * In case that the USB3.0 downstream port is not available
+ * No one triggers to start the xHC which should be done
+ * before finishing xhci_run
+ */
+ if (xhci->num_usb3_ports == 0) {
+ if (xhci_start(xhci)) {
+ xhci_halt(xhci);
+ return -ENODEV;
+ }
+ xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+ }
+
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Finished xhci_run for USB2 roothub");

--
1.8.3.1
\
 
 \ /
  Last update: 2018-01-29 11:25    [W:0.868 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site