lkml.org 
[lkml]   [2018]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1] arm: dts: ls1021a: Add configure-gfladj property to USB3 node
Date
From: yinbo.zhu <yinbo.zhu@nxp.com>

Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustent is required
or not

Signed-off-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
---
arch/arm/boot/dts/ls1021a.dtsi | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index f81fad2..a5ccf7a 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -707,6 +707,7 @@
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
+ configure-gfladj;
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
};
--
1.7.1
\
 
 \ /
  Last update: 2018-01-22 10:26    [W:0.021 / U:1.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site