lkml.org 
[lkml]   [2017]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/2] add thermal nodes for UniPhier SoCs
Date
This series adds thermal nodes for UniPhier PXs2 and LD20 SoCs.

Changes since v3:
- rebase on top of linux-next

Changes since v2:
- add the calibration value to device tree for LD20 reference board

Changes since v1:
- separate from driver's patchset[1]
- add cooling-maps nodes on the device tree
- fix an interrupt trigger to set 'level-triggered' according to
hardware specification
- bring up threshold temperature for LD20 according to the spec sheet
- add cpuN labels for reference in cooling-device property on PXs2 dts

[1] https://lkml.org/lkml/2017/6/28/170

Kunihiko Hayashi (2):
ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for
PXs2
arm64: dts: uniphier: add nodes of thermal monitor and thermal zone
for LD20

arch/arm/boot/dts/uniphier-pxs2.dtsi | 43 ++++++++++++++++++++--
.../arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 4 ++
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 40 ++++++++++++++++++++
3 files changed, 83 insertions(+), 4 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2017-09-04 03:16    [W:0.089 / U:1.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site