Messages in this thread Patch in this message | | | From | Martyn Welch <> | Subject | [PATCH] serial: imx: Switch setting dma_is_txing from "false" to "0" | Date | Thu, 28 Sep 2017 11:38:51 +0100 |
| |
The variable "dma_is_txing" is an unsigned int, set as either "0" or "1" in all but one location, where it is instead set to "false". For consistency, set dma_is_txing to "0" in this location too.
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> --- drivers/tty/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 9da109a..474b5bc 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1410,7 +1410,7 @@ static void imx_flush_buffer(struct uart_port *port) temp = readl(sport->port.membase + UCR1); temp &= ~UCR1_TDMAEN; writel(temp, sport->port.membase + UCR1); - sport->dma_is_txing = false; + sport->dma_is_txing = 0; } /* -- 1.8.3.1
| |