lkml.org 
[lkml]   [2017]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clk: sunxi-ng: Implement reset control status readback
Date
Until now we were not providing a way to read back the status of our
reset controls. Consumers had no real way to be certain whether a
peripheral was held in reset or not.

Implement the status callback to complete the API support.

Fixes: 1d80c14248d6 ("clk: sunxi-ng: Add common infrastructure")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
drivers/clk/sunxi-ng/ccu_reset.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/drivers/clk/sunxi-ng/ccu_reset.c b/drivers/clk/sunxi-ng/ccu_reset.c
index 1dc4e98ea802..b67149143554 100644
--- a/drivers/clk/sunxi-ng/ccu_reset.c
+++ b/drivers/clk/sunxi-ng/ccu_reset.c
@@ -60,8 +60,22 @@ static int ccu_reset_reset(struct reset_controller_dev *rcdev,
return 0;
}

+static int ccu_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct ccu_reset *ccu = rcdev_to_ccu_reset(rcdev);
+ const struct ccu_reset_map *map = &ccu->reset_map[id];
+
+ /*
+ * The reset control API expects 0 if reset is not asserted,
+ * which is the opposite of what our hardware uses.
+ */
+ return !(map->bit & readl(ccu->base + map->reg));
+}
+
const struct reset_control_ops ccu_reset_ops = {
.assert = ccu_reset_assert,
.deassert = ccu_reset_deassert,
.reset = ccu_reset_reset,
+ .status = ccu_reset_status,
};
--
2.14.1
\
 
 \ /
  Last update: 2017-09-26 04:37    [W:0.144 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site