lkml.org 
[lkml]   [2017]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: update OpenFirmware document links to devicetree.org
Date
The mirrors for old, but still referenced OF documents have disappeared.
A new mirror has been setup on devicetree.org at:

http://devicetree.org/open-firmware/home.html

Update the URLs in the binding documents with the new mirror.

Cc: Brian Norris <briannorris@chromium.org>
Cc: Harvey Hunt <harvey.hunt@imgtec.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/pci/pci.txt | 4 ++--
Documentation/devicetree/bindings/usb/usb-device.txt | 2 +-
Documentation/devicetree/booting-without-of.txt | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
index 50f9e2ca5b13..c77981c5dd18 100644
--- a/Documentation/devicetree/bindings/pci/pci.txt
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -1,12 +1,12 @@
PCI bus bridges have standardized Device Tree bindings:

PCI Bus Binding to: IEEE Std 1275-1994
-http://www.firmware.org/1275/bindings/pci/pci2_1.pdf
+http://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf

And for the interrupt mapping part:

Open Firmware Recommended Practice: Interrupt Mapping
-http://www.firmware.org/1275/practice/imap/imap0_9d.pdf
+http://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf

Additionally to the properties specified in the above standards a host bridge
driver implementation may support the following properties:
diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
index 1c35e7b665e1..d5f1992b797c 100644
--- a/Documentation/devicetree/bindings/usb/usb-device.txt
+++ b/Documentation/devicetree/bindings/usb/usb-device.txt
@@ -2,7 +2,7 @@ Generic USB Device Properties

Usually, we only use device tree for hard wired USB device.
The reference binding doc is from:
-http://www.firmware.org/1275/bindings/usb/usb-1_0.ps
+http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps

Required properties:
- compatible: usbVID,PID. The textual representation of VID, PID shall
diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
index fb740445199f..417f91110010 100644
--- a/Documentation/devicetree/booting-without-of.txt
+++ b/Documentation/devicetree/booting-without-of.txt
@@ -1282,7 +1282,7 @@ hierarchy and routing of interrupts in the hardware.
The interrupt tree model is fully described in the
document "Open Firmware Recommended Practice: Interrupt
Mapping Version 0.9". The document is available at:
-<http://www.openfirmware.org/ofwg/practice/>
+<http://www.devicetree.org/open-firmware/practice/>

1) interrupts property
----------------------
--
2.11.0
\
 
 \ /
  Last update: 2017-08-01 18:05    [W:0.027 / U:1.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site