lkml.org 
[lkml]   [2017]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] Enable usb2 function on poplar board
Date
This patchset is mainly used to enable the usb2 function on poplar board,
including usb2 phy drivers, dts nodes and configs.

Jiancheng Xue (3):
dt-bindings: phy-hisi-inno-usb2: add support for hisi-inno-usb2 phy
arm64: dts: hisilicon: add usb2 controller and phy nodes for poplar
board.
arm64: defconfig: enable some drivers for hi3798cv200-poplar board.

Pengcheng Li (1):
phy: add inno-usb2-phy driver for hi3798cv200 SoC

.../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 31 +++
.../boot/dts/hisilicon/hi3798cv200-poplar.dts | 13 ++
arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 60 ++++++
arch/arm64/configs/defconfig | 4 +
drivers/phy/hisilicon/Kconfig | 11 +-
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 236 +++++++++++++++++++++
7 files changed, 355 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
create mode 100644 drivers/phy/hisilicon/phy-hisi-inno-usb2.c

--
1.9.1

\
 
 \ /
  Last update: 2017-07-26 08:36    [W:0.278 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site