Messages in this thread Patch in this message | | | From | Marc Zyngier <> | Subject | [PATCH] irqchip/bcm2836: Move SMP startup code to arch/arm | Date | Wed, 10 May 2017 14:26:20 +0100 |
| |
One of the RPi-2/3 irqchip's key features is that it contains some SMP startup code for the 32bit ARM architecture version. The only reason I can imagine for this is "RPi is special".
Let's move this code where it belongs (in the platform support code), creating a shared include file for this purpose.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> --- This is only compile-tested (I do not own this HW).
arch/arm/mach-bcm/board_bcm2835.c | 36 ++++++++++++++++- drivers/irqchip/irq-bcm2836.c | 79 +------------------------------------ include/linux/irqchip/irq-bcm2836.h | 70 ++++++++++++++++++++++++++++++++ 3 files changed, 107 insertions(+), 78 deletions(-) create mode 100644 include/linux/irqchip/irq-bcm2836.h
diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 0c1edfc98696..1e7c6aa54b68 100644 --- a/arch/arm/mach-bcm/board_bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c @@ -16,10 +16,43 @@ #include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/clk/bcm2835.h> +#include <linux/irqchip/irq-bcm2836.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#ifdef CONFIG_SMP +static const struct of_device_id bcm2836_intc[] = { + { .compatible = "brcm,bcm2836-l1-intc" }, + { }, +}; + +static int bcm2836_smp_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + struct device_node *np; + void __iomem *base; + + np = of_find_matching_node(NULL, bcm2836_intc); + if (!np) + return -ENODEV; + + base = of_iomap(np, 0); + if (!base) + return -ENOMEM; + + writel(virt_to_phys(secondary_startup), + base + LOCAL_MAILBOX3_SET0 + 16 * cpu); + + iounmap(base); + + return 0; +} + +static const struct smp_operations bcm2836_smp_ops = { + .smp_boot_secondary = bcm2836_smp_boot_secondary, +}; +#endif + static void __init bcm2835_init(void) { bcm2835_init_clocks(); @@ -37,5 +70,6 @@ static const char * const bcm2835_compat[] = { DT_MACHINE_START(BCM2835, "BCM2835") .init_machine = bcm2835_init, - .dt_compat = bcm2835_compat + .dt_compat = bcm2835_compat, + .smp = smp_ops(bcm2836_smp_ops), MACHINE_END diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c index e7463e3c0814..cb4a6f52005e 100644 --- a/drivers/irqchip/irq-bcm2836.c +++ b/drivers/irqchip/irq-bcm2836.c @@ -19,62 +19,9 @@ #include <linux/of_irq.h> #include <linux/irqchip.h> #include <linux/irqdomain.h> -#include <asm/exception.h> - -#define LOCAL_CONTROL 0x000 -#define LOCAL_PRESCALER 0x008 +#include <linux/irqchip/irq-bcm2836.h> -/* - * The low 2 bits identify the CPU that the GPU IRQ goes to, and the - * next 2 bits identify the CPU that the GPU FIQ goes to. - */ -#define LOCAL_GPU_ROUTING 0x00c -/* When setting bits 0-3, enables PMU interrupts on that CPU. */ -#define LOCAL_PM_ROUTING_SET 0x010 -/* When setting bits 0-3, disables PMU interrupts on that CPU. */ -#define LOCAL_PM_ROUTING_CLR 0x014 -/* - * The low 4 bits of this are the CPU's timer IRQ enables, and the - * next 4 bits are the CPU's timer FIQ enables (which override the IRQ - * bits). - */ -#define LOCAL_TIMER_INT_CONTROL0 0x040 -/* - * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and - * the next 4 bits are the CPU's per-mailbox FIQ enables (which - * override the IRQ bits). - */ -#define LOCAL_MAILBOX_INT_CONTROL0 0x050 -/* - * The CPU's interrupt status register. Bits are defined by the the - * LOCAL_IRQ_* bits below. - */ -#define LOCAL_IRQ_PENDING0 0x060 -/* Same status bits as above, but for FIQ. */ -#define LOCAL_FIQ_PENDING0 0x070 -/* - * Mailbox write-to-set bits. There are 16 mailboxes, 4 per CPU, and - * these bits are organized by mailbox number and then CPU number. We - * use mailbox 0 for IPIs. The mailbox's interrupt is raised while - * any bit is set. - */ -#define LOCAL_MAILBOX0_SET0 0x080 -#define LOCAL_MAILBOX3_SET0 0x08c -/* Mailbox write-to-clear bits. */ -#define LOCAL_MAILBOX0_CLR0 0x0c0 -#define LOCAL_MAILBOX3_CLR0 0x0cc - -#define LOCAL_IRQ_CNTPSIRQ 0 -#define LOCAL_IRQ_CNTPNSIRQ 1 -#define LOCAL_IRQ_CNTHPIRQ 2 -#define LOCAL_IRQ_CNTVIRQ 3 -#define LOCAL_IRQ_MAILBOX0 4 -#define LOCAL_IRQ_MAILBOX1 5 -#define LOCAL_IRQ_MAILBOX2 6 -#define LOCAL_IRQ_MAILBOX3 7 -#define LOCAL_IRQ_GPU_FAST 8 -#define LOCAL_IRQ_PMU_FAST 9 -#define LAST_IRQ LOCAL_IRQ_PMU_FAST +#include <asm/exception.h> struct bcm2836_arm_irqchip_intc { struct irq_domain *domain; @@ -215,24 +162,6 @@ static int bcm2836_cpu_dying(unsigned int cpu) cpu); return 0; } - -#ifdef CONFIG_ARM -static int __init bcm2836_smp_boot_secondary(unsigned int cpu, - struct task_struct *idle) -{ - unsigned long secondary_startup_phys = - (unsigned long)virt_to_phys((void *)secondary_startup); - - writel(secondary_startup_phys, - intc.base + LOCAL_MAILBOX3_SET0 + 16 * cpu); - - return 0; -} - -static const struct smp_operations bcm2836_smp_ops __initconst = { - .smp_boot_secondary = bcm2836_smp_boot_secondary, -}; -#endif #endif static const struct irq_domain_ops bcm2836_arm_irqchip_intc_ops = { @@ -249,10 +178,6 @@ bcm2836_arm_irqchip_smp_init(void) bcm2836_cpu_dying); set_smp_cross_call(bcm2836_arm_irqchip_send_ipi); - -#ifdef CONFIG_ARM - smp_set_ops(&bcm2836_smp_ops); -#endif #endif } diff --git a/include/linux/irqchip/irq-bcm2836.h b/include/linux/irqchip/irq-bcm2836.h new file mode 100644 index 000000000000..218a6e1b18d8 --- /dev/null +++ b/include/linux/irqchip/irq-bcm2836.h @@ -0,0 +1,70 @@ +/* + * Root interrupt controller for the BCM2836 (Raspberry Pi 2). + * + * Copyright 2015 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define LOCAL_CONTROL 0x000 +#define LOCAL_PRESCALER 0x008 + +/* + * The low 2 bits identify the CPU that the GPU IRQ goes to, and the + * next 2 bits identify the CPU that the GPU FIQ goes to. + */ +#define LOCAL_GPU_ROUTING 0x00c +/* When setting bits 0-3, enables PMU interrupts on that CPU. */ +#define LOCAL_PM_ROUTING_SET 0x010 +/* When setting bits 0-3, disables PMU interrupts on that CPU. */ +#define LOCAL_PM_ROUTING_CLR 0x014 +/* + * The low 4 bits of this are the CPU's timer IRQ enables, and the + * next 4 bits are the CPU's timer FIQ enables (which override the IRQ + * bits). + */ +#define LOCAL_TIMER_INT_CONTROL0 0x040 +/* + * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and + * the next 4 bits are the CPU's per-mailbox FIQ enables (which + * override the IRQ bits). + */ +#define LOCAL_MAILBOX_INT_CONTROL0 0x050 +/* + * The CPU's interrupt status register. Bits are defined by the the + * LOCAL_IRQ_* bits below. + */ +#define LOCAL_IRQ_PENDING0 0x060 +/* Same status bits as above, but for FIQ. */ +#define LOCAL_FIQ_PENDING0 0x070 +/* + * Mailbox write-to-set bits. There are 16 mailboxes, 4 per CPU, and + * these bits are organized by mailbox number and then CPU number. We + * use mailbox 0 for IPIs. The mailbox's interrupt is raised while + * any bit is set. + */ +#define LOCAL_MAILBOX0_SET0 0x080 +#define LOCAL_MAILBOX3_SET0 0x08c +/* Mailbox write-to-clear bits. */ +#define LOCAL_MAILBOX0_CLR0 0x0c0 +#define LOCAL_MAILBOX3_CLR0 0x0cc + +#define LOCAL_IRQ_CNTPSIRQ 0 +#define LOCAL_IRQ_CNTPNSIRQ 1 +#define LOCAL_IRQ_CNTHPIRQ 2 +#define LOCAL_IRQ_CNTVIRQ 3 +#define LOCAL_IRQ_MAILBOX0 4 +#define LOCAL_IRQ_MAILBOX1 5 +#define LOCAL_IRQ_MAILBOX2 6 +#define LOCAL_IRQ_MAILBOX3 7 +#define LOCAL_IRQ_GPU_FAST 8 +#define LOCAL_IRQ_PMU_FAST 9 +#define LAST_IRQ LOCAL_IRQ_PMU_FAST -- 2.11.0
| |