lkml.org 
[lkml]   [2017]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] net: arc_emac: switch to phy_start()/phy_stop()
Date
The patch replace phy_start_aneg() with phy_start(). phy_start() call
phy_start_aneg() as a part of startup sequence and allow recover from
error (PHY_HALTED) state.

Also added call phy_stop() to arc_emac_remove() to stop PHY state machine
when MAC is down.

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
---
drivers/net/ethernet/arc/emac_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c
index abc9f2a..188676d 100644
--- a/drivers/net/ethernet/arc/emac_main.c
+++ b/drivers/net/ethernet/arc/emac_main.c
@@ -434,7 +434,7 @@ static int arc_emac_open(struct net_device *ndev)
/* Enable EMAC */
arc_reg_or(priv, R_CTRL, EN_MASK);

- phy_start_aneg(ndev->phydev);
+ phy_start(ndev->phydev);

netif_start_queue(ndev);

@@ -556,6 +556,8 @@ static int arc_emac_stop(struct net_device *ndev)
napi_disable(&priv->napi);
netif_stop_queue(ndev);

+ phy_stop(ndev->phydev);
+
/* Disable interrupts */
arc_reg_clr(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK);

--
1.7.9.5
\
 
 \ /
  Last update: 2017-04-19 16:30    [W:0.041 / U:2.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site