lkml.org 
[lkml]   [2017]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V3] Set sda-hold-time based on ACPI *CNT value
Date
For I2c to operate correctly under all speed mode, sda-hold-time need to
be perfectly tuned. However, sda-hold-time is precalculated according to
circuit parameter which make it platform-specific.

In order to get accurate sda-hold-time for all platforms, pretuned
sda-hold-time for particular platform is stored in ACPI table and driver
to load the sda holding time from ACPI table.

This patch read the I2c sda-hold-time from ACPI table and assigned the
suitable hold time based on the i2c clock frequency.

Tested on Intel Apollo Lake.

Changes in V3:
- Remove null handling in function dw_i2c_acpi_params.
- Add descriptions to commit message.

Changes in V2:
- The code is realigned according to suggestion.
- "case 400000:" is added on top of "default:" for readability.

Tan Chin Yew (1):
i2c: designware: Get selected speed mode sda-hold-time via ACPI

drivers/i2c/busses/i2c-designware-platdrv.c | 31 ++++++++++++++++++++---------
1 file changed, 22 insertions(+), 9 deletions(-)

--
1.9.1

\
 
 \ /
  Last update: 2017-03-28 10:49    [W:0.050 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site