lkml.org 
[lkml]   [2017]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 15/17] iio: pressure: mpl3115: Add OF device ID table
Date
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

drivers/iio/pressure/mpl3115.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/iio/pressure/mpl3115.c b/drivers/iio/pressure/mpl3115.c
index 525644a7442d..619b963714c7 100644
--- a/drivers/iio/pressure/mpl3115.c
+++ b/drivers/iio/pressure/mpl3115.c
@@ -321,9 +321,16 @@ static const struct i2c_device_id mpl3115_id[] = {
};
MODULE_DEVICE_TABLE(i2c, mpl3115_id);

+static const struct of_device_id mpl3115_of_match[] = {
+ { .compatible = "fsl,mpl3115" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mpl3115_of_match);
+
static struct i2c_driver mpl3115_driver = {
.driver = {
.name = "mpl3115",
+ .of_match_table = mpl3115_of_match,
.pm = MPL3115_PM_OPS,
},
.probe = mpl3115_probe,
--
2.9.3
\
 
 \ /
  Last update: 2017-03-15 05:47    [W:0.148 / U:24.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site