lkml.org 
[lkml]   [2017]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 13/17] iio: magnetometer: mag3110: Add OF device ID table
Date
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

drivers/iio/magnetometer/mag3110.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
index b4f643fb3b1e..dad8d57f7402 100644
--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -441,9 +441,16 @@ static const struct i2c_device_id mag3110_id[] = {
};
MODULE_DEVICE_TABLE(i2c, mag3110_id);

+static const struct of_device_id mag3110_of_match[] = {
+ { .compatible = "fsl,mag3110" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mag3110_of_match);
+
static struct i2c_driver mag3110_driver = {
.driver = {
.name = "mag3110",
+ .of_match_table = mag3110_of_match,
.pm = MAG3110_PM_OPS,
},
.probe = mag3110_probe,
--
2.9.3
\
 
 \ /
  Last update: 2017-03-15 05:47    [W:0.183 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site