lkml.org 
[lkml]   [2017]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] dt-bindings: add the grf clock for dw-mipi-dsi
Date
For RK3399, the grf clock should be controlled by dw-mipi-dsi driver,
add the description for this clock.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

.../devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
index 188f6f7..7e17a60 100644
--- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -10,7 +10,7 @@ Required properties:
- interrupts: Represent the controller's interrupt to the CPU(s).
- clocks, clock-names: Phandles to the controller's pll reference
clock(ref) and APB clock(pclk). For RK3399, a phy config clock
- (phy_cfg) is additional required. As described in [1].
+ (phy_cfg) and a grf clock(grf) are additional required. As described in [1].
- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
- ports: contain a port node with endpoint definitions as defined in [2].
For vopb,set the reg = <0> and set the reg = <1> for vopl.
--
2.6.3
\
 
 \ /
  Last update: 2017-03-15 09:43    [W:0.089 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site