Messages in this thread Patch in this message | | | From | Lukasz Majewski <> | Subject | [PATCH 1/2] DTS: dra7: Replace obsolete "operating-points" property with "operating-points-v2" | Date | Fri, 3 Feb 2017 16:24:50 +0100 |
| |
The "operating-points" property have been replaced with "operating-points-v2". Only entries with the same frequencies have been added, so no reqression should be introduced.
Signed-off-by: Lukasz Majewski <lukma@denx.de> --- arch/arm/boot/dts/dra7.dtsi | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 3c228f9..a860a56 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -80,11 +80,7 @@ compatible = "arm,cortex-a15"; reg = <0>; - operating-points = < - /* kHz uV */ - 1000000 1060000 - 1176000 1160000 - >; + operating-points-v2 = <&cpu0_opp_table>; clocks = <&dpll_mpu_ck>; clock-names = "cpu"; @@ -98,6 +94,22 @@ }; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp_nom@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1060000 850000 1150000>; + opp-suspend; + }; + + opp_od@1176000000 { + opp-hz = /bits/ 64 <1176000000>; + opp-microvolt = <1160000 885000 1160000>; + }; + }; + /* * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. -- 2.1.4
| |