lkml.org 
[lkml]   [2017]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/6] dt-bindings: iio: document interrupt trigger support
Date
Document interrupt trigger that takes a generic interrupt, and
can be used as trigger source for sampling devices such as sensors,
ADCs...

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
.../bindings/iio/trigger/iio-trig-interrupt.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/trigger/iio-trig-interrupt.txt

diff --git a/Documentation/devicetree/bindings/iio/trigger/iio-trig-interrupt.txt b/Documentation/devicetree/bindings/iio/trigger/iio-trig-interrupt.txt
new file mode 100644
index 0000000..9de9856
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/trigger/iio-trig-interrupt.txt
@@ -0,0 +1,22 @@
+Interrupt based trigger
+
+Any internal or external interrupt may be used as trigger source for
+devices like sensors, ADCs... As an example, external signal can be
+routed to a GPIO, and turned into an interrupt driven trigger.
+
+Required properties:
+- compatible: Should be "interrupt-trigger"
+- interrupts: The interrupt used as trigger. Generic interrupt client node as
+ described in ../../interrupt-controller/interrupts.txt
+
+Optional properties:
+- #io-trigger-cells = <0>; See the IIO bindings, IIO trigger providers
+ and consumers sections in ../iio-bindings.txt
+
+Example:
+ trig0: interrupt-trigger0 {
+ #io-trigger-cells = <0>;
+ compatible = "interrupt-trigger";
+ interrupts = <11 0>;
+ interrupt-parent = <&gpioa>;
+ }
--
1.9.1
\
 
 \ /
  Last update: 2017-02-28 19:22    [W:0.040 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site