Messages in this thread Patch in this message | | | From | Javier Martinez Canillas <> | Subject | [PATCH] usb: phy: isp1301: Add OF device ID table | Date | Wed, 22 Feb 2017 15:23:22 -0300 |
| |
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> ---
drivers/usb/phy/phy-isp1301.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c index db68156568e6..b3b33cf7ddf6 100644 --- a/drivers/usb/phy/phy-isp1301.c +++ b/drivers/usb/phy/phy-isp1301.c @@ -33,6 +33,12 @@ static const struct i2c_device_id isp1301_id[] = { }; MODULE_DEVICE_TABLE(i2c, isp1301_id); +static const struct of_device_id isp1301_of_match[] = { + {.compatible = "nxp,isp1301" }, + { }, +}; +MODULE_DEVICE_TABLE(of, isp1301_of_match); + static struct i2c_client *isp1301_i2c_client; static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear) @@ -130,6 +136,7 @@ static int isp1301_remove(struct i2c_client *client) static struct i2c_driver isp1301_driver = { .driver = { .name = DRV_NAME, + .of_match_table = of_match_ptr(isp1301_of_match), }, .probe = isp1301_probe, .remove = isp1301_remove, -- 2.9.3
| |