Messages in this thread | | | Date | Wed, 22 Feb 2017 15:56:34 +0100 | From | Greg KH <> | Subject | [GIT PULL] TTY/Serial driver patches for 4.11-rc1 |
| |
The following changes since commit 49def1853334396f948dcb4cedb9347abb318df5:
Linux 4.10-rc4 (2017-01-15 16:21:59 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git/ tags/tty-4.11-rc1
for you to fetch changes up to d8a4995bcea168dfac8ee41c28c79109907e4fba:
tty: pl011: Work around QDF2400 E44 stuck BUSY bit (2017-02-15 14:46:43 -0800)
---------------------------------------------------------------- TTY/Serial driver patches for 4.11-rc1
Here is the big tty/serial driver patchset for 4.11-rc1.
Not much here, but a lot of little fixes and individual serial driver updates all over the subsystem. Majority are for the sh-sci driver and platform (the arch-specific changes have acks from the maintainer).
The start of the "serial bus" code is here as well, but nothing is converted to use it yet. That work is still ongoing, hopefully will start to show up across different subsystems for 4.12 (bluetooth is one major place that will be used.)
All of these have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---------------------------------------------------------------- Alan Cox (1): tty_port: allow a port to be opened with a tty that has no file handle
Alexander Shiyan (1): serial: max310x: Add support for newer silicon revisions
Alexander Sverdlin (1): serial: pl011: Mark console as CON_ANYTIME
Alexandre Belloni (1): tty/serial: atmel: ensure state is restored after suspending
Alexey Brodkin (1): serial: 8250_port: Remove dangerous pr_debug()
Andy Shevchenko (4): serial: 8250_lpss: avoid potential kernel crash when remove serial: 8250_mid: handle interrupt correctly in DMA case serial: 8250_mid: enable MSI on Denverton serial: 8250_mid: set PCI master only for DMA capable device
Arnd Bergmann (1): 8250: of: remove remnants of generic of_serial driver
Arvind Yadav (1): tty: serial: 8250: 8250_gsc:- Handle return NULL error from ioremap_nocache
Bhumika Goyal (2): tty: serial: constify dev_pm_ops structures tty: serial: constify uart_ops structures
Christophe JAILLET (2): serial: pic32_uart: Fix 'request_irq' and 'free_irq' inconsistancy tty: goldfish: Fix a parameter of a call to free_irq
Christopher Covington (1): tty: pl011: Work around QDF2400 E44 stuck BUSY bit
Dan Carpenter (1): serdev: ttyport: check whether tty_init_dev() fails
David Lechner (2): doc: DT: Add ti,da830-uart to serial/8250 bindings serial: 8250: Add new port type for TI DA8xx/66AK2x
Dmitry Torokhov (1): tty: serial: cpm_uart: make use of for_each_node_by_type()
Douglas Anderson (1): serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt
Fabio Estevam (3): serial: imx: Allow passing 'rst-gpios' for rs485 mode serial: imx: Fix the RTS GPIO polarity in RS485 mode serial: imx: Fix the CTS_B polarity in RS485 mode
Felix Fietkau (1): serial: do not accept sysrq characters via serial port
Geert Uytterhoeven (1): serial: sh-sci: Reformat sci_parse_dt() for git diff
Greg Kroah-Hartman (1): Merge 4.10-rc4 into tty-next
Ian Abbott (1): serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards
Jan Kiszka (7): serial: exar: Fix mapping of port I/O resources serial: exar: Fix initialization of EXAR registers for ports > 0 serial: exar: Fix feature control register constants serial: exar: Move Commtech adapters to 8250_exar as well serial: pci: Remove unused pci_boards entries serial: exar: Move register defines from uapi header to consumer site serial: exar: Enable MSI support
Jason Uy (1): serial: 8250_dw: Allow hardware flow control to be used
Javier Martinez Canillas (1): tty: serial: msm: Fix module autoload
Jean Delvare (3): serial: 8250_pci: make option visible serial: 8250_lpss: make option visible serial: 8250_mid: make option visible
Ji-Ze Hong (Peter Hong) (1): serial: 8250_fintek: Add resource check for Fintek F81504/508/512
John Crispin (1): tty: update my email address
Laurent Pinchart (18): serial: sh-sci: Set the SCSCR TE and RE bits in the driver serial: sh-sci: Don't rely on platform data flags when not needed sh: Don't set sh-sci pdata scscr TE and RE bits sh: Don't set sh-sci pdata scscr TIE and RIE bits sh: sh726[49]: Don't set sh-sci pdata scscr TOIE bit sh: Don't set the sh-sci pdata UPF_BOOT_AUTOCONF flags sh: Don't set sh-sci port_reg sh: Don't set the sh-sci platform data scscr CKE0 bit sh: Don't set the sh-sci platform data REIE bit when not implemented serial: sh-sci: Fix register offsets for the IRDA serial port serial: sh-sci: Remove initialization of zero fields in sci_port_params serial: sh-sci: Replace regmap array with port parameters serial: sh-sci: Constify platform data serial: sh-sci: Extend sci_port_params with more port parameters serial: sh-sci: Remove the platform data dma slave rx/tx channel IDs serial: sh-sci: Remove manual break debouncing serial: sh-sci: Remove unused platform data capabilities field serial: sh-sci: Compute the regshift value for SCI ports
Lee Jones (10): serial: st-asc: Ignore the parity error bit if 8-bit mode is enabled serial: st-asc: Provide RTS functionality serial: st-asc: Read in all Pinctrl states serial: st-asc: (De)Register GPIOD and swap Pinctrl profiles serial: st-asc: Use generic DT binding for announcing RTS/CTS lines dt-bindings: serial: Update 'uart-has-rtscts' description ARM: dts: STiH410-b2260: Identify the UART RTS line ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control ARM: dts: STiH407-family: Use new Pinctrl groups ARM: dts: STiH410-b2260: Enable HW flow-control
Lokesh Vutla (1): serial: omap: Add omapserial earlycon
Manuel Schölling (4): console: Move scrollback data into its own struct console: Add callback to flush scrollback buffer to consw struct console: Add persistent scrollback buffers for all VGA consoles console: Make persistent scrollback a boot parameter
Marek Szyprowski (1): serial: samsung: Simplify DMA engine initialization code
Martin Blumenstingl (2): tty: serial: lantiq: implement earlycon support tty: serial: meson: allow baud-rates higher than 115200
Matwey V. Kornilov (1): serial: 8250: moxa: Store num_ports in brd
Nikita Yushchenko (1): tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock
Pan Bian (1): tty: serial: sh-sci: set error code when kasprintf fails
Paul Gortmaker (1): serial: hp300: mask the warning for people just doing build coverage
Rob Herring (8): tty: move the non-file related parts of tty_release to new tty_release_struct tty_port: make tty_port_register_device wrap tty_port_register_device_attr tty: constify tty_ldisc_receive_buf buffer pointer tty_port: Add port client functions dt/bindings: Add a serial/UART attached device binding serdev: Introduce new bus for serial attached devices serdev: add a tty port controller driver tty_port: register tty ports with serdev bus
Romain Izard (1): atmel_serial: Use the fractional divider when possible
Sergio Valverde (1): tty: Remove extra include in HVC console tty framework
Sudeep Holla (1): tty: serial: pl011: add ttyAMA for matching pl011 console
Sudip Mukherjee (2): serial: exar: split out the exar code from 8250_pci serial: 8250_pci: remove exar code
Tony Lindgren (1): serial: 8250_omap: Fix probe and remove for PM runtime
Ulrich Hecht (7): serial: sh-sci: add FIFO trigger bits serial: sh-sci: consider DR (data ready) bit adequately serial: sh-sci: implement FIFO threshold register setting serial: sh-sci: increase RX FIFO trigger defaults for (H)SCIF serial: sh-sci: SCIFA/B RX FIFO software timeout serial: sh-sci: make RX FIFO parameters tunable via sysfs serial: sh-sci: fix hardware RX trigger level setting
Vignesh R (3): serial: 8250_omap: pause DMA only if DMA transfer in progress serial: 8250_omap: Add OMAP_DMA_TX_KICK quirk for AM437x serial: 8250_omap: Remove rx_dma_broken flag
Wei Yongjun (1): serial: 8250_pci: make pciserial_detach_ports() static
Wolfgang Ocker (1): serial: mxs-auart: support CMSPAR termios cflag
Yasir-Khan (1): serial: xuartps: Enable uart loopback mode
남영민 (1): serial: samsung: enable clock before accessing interrupt mask resister
Documentation/admin-guide/kernel-parameters.txt | 6 + Documentation/devicetree/bindings/serial/8250.txt | 1 + .../devicetree/bindings/serial/serial.txt | 3 +- .../devicetree/bindings/serial/slave-device.txt | 36 + MAINTAINERS | 8 + arch/arm/boot/dts/stih407-family.dtsi | 3 +- arch/arm/boot/dts/stih407-pinctrl.dtsi | 12 +- arch/arm/boot/dts/stih410-b2260.dts | 5 + arch/sh/kernel/cpu/sh2/setup-sh7619.c | 9 +- arch/sh/kernel/cpu/sh2a/setup-mxg.c | 3 +- arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 24 +- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 16 +- arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 12 +- arch/sh/kernel/cpu/sh2a/setup-sh7264.c | 32 +- arch/sh/kernel/cpu/sh2a/setup-sh7269.c | 32 +- arch/sh/kernel/cpu/sh3/setup-sh7705.c | 6 +- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 10 - arch/sh/kernel/cpu/sh3/setup-sh7710.c | 8 +- arch/sh/kernel/cpu/sh3/setup-sh7720.c | 4 - arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 3 +- arch/sh/kernel/cpu/sh4/setup-sh7750.c | 9 +- arch/sh/kernel/cpu/sh4/setup-sh7760.c | 21 +- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 12 +- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 4 +- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 9 +- arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 21 +- arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 21 +- arch/sh/kernel/cpu/sh4a/setup-sh7734.c | 18 +- arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 9 +- arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 9 +- arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 30 +- arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 6 +- arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 18 +- arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 18 +- arch/sh/kernel/cpu/sh4a/setup-shx3.c | 9 +- arch/sh/kernel/cpu/sh5/setup-sh5.c | 4 +- drivers/acpi/spcr.c | 23 + drivers/char/Kconfig | 1 + drivers/dma/hsu/pci.c | 17 +- drivers/tty/Makefile | 1 + drivers/tty/goldfish.c | 2 +- drivers/tty/hvc/hvc_console.c | 1 - drivers/tty/serdev/Kconfig | 16 + drivers/tty/serdev/Makefile | 5 + drivers/tty/serdev/core.c | 421 ++++++++ drivers/tty/serdev/serdev-ttyport.c | 226 ++++ drivers/tty/serial/8250/8250_dw.c | 28 +- drivers/tty/serial/8250/8250_exar.c | 487 +++++++++ drivers/tty/serial/8250/8250_gsc.c | 4 + drivers/tty/serial/8250/8250_hp300.c | 2 +- drivers/tty/serial/8250/8250_lpss.c | 4 +- drivers/tty/serial/8250/8250_mid.c | 45 +- drivers/tty/serial/8250/8250_moxa.c | 1 + drivers/tty/serial/8250/8250_of.c | 94 +- drivers/tty/serial/8250/8250_omap.c | 33 +- drivers/tty/serial/8250/8250_pci.c | 515 +-------- drivers/tty/serial/8250/8250_port.c | 32 +- drivers/tty/serial/8250/Kconfig | 11 +- drivers/tty/serial/8250/Makefile | 1 + drivers/tty/serial/Kconfig | 1 + drivers/tty/serial/amba-pl010.c | 2 +- drivers/tty/serial/amba-pl011.c | 70 +- drivers/tty/serial/ar933x_uart.c | 2 +- drivers/tty/serial/atmel_serial.c | 51 +- drivers/tty/serial/bfin_sport_uart.c | 2 +- drivers/tty/serial/cpm_uart/cpm_uart_core.c | 18 +- drivers/tty/serial/dz.c | 2 +- drivers/tty/serial/efm32-uart.c | 2 +- drivers/tty/serial/fsl_lpuart.c | 35 +- drivers/tty/serial/icom.c | 2 +- drivers/tty/serial/imx.c | 32 +- drivers/tty/serial/ioc3_serial.c | 2 +- drivers/tty/serial/ioc4_serial.c | 2 +- drivers/tty/serial/ip22zilog.c | 2 +- drivers/tty/serial/lantiq.c | 42 +- drivers/tty/serial/lpc32xx_hs.c | 2 +- drivers/tty/serial/max310x.c | 2 +- drivers/tty/serial/meson_uart.c | 2 +- drivers/tty/serial/mpsc.c | 2 +- drivers/tty/serial/msm_serial.c | 1 + drivers/tty/serial/mxs-auart.c | 3 + drivers/tty/serial/omap-serial.c | 57 +- drivers/tty/serial/pic32_uart.c | 6 +- drivers/tty/serial/pmac_zilog.c | 2 +- drivers/tty/serial/pnx8xxx_uart.c | 2 +- drivers/tty/serial/pxa.c | 2 +- drivers/tty/serial/samsung.c | 20 +- drivers/tty/serial/samsung.h | 4 - drivers/tty/serial/serial-tegra.c | 2 +- drivers/tty/serial/serial_txx9.c | 2 +- drivers/tty/serial/sh-sci.c | 1092 +++++++++++--------- drivers/tty/serial/sh-sci.h | 12 +- drivers/tty/serial/sirfsoc_uart.c | 2 +- drivers/tty/serial/sn_console.c | 2 +- drivers/tty/serial/sprd_serial.c | 2 +- drivers/tty/serial/st-asc.c | 101 +- drivers/tty/serial/sunhv.c | 2 +- drivers/tty/serial/sunzilog.c | 2 +- drivers/tty/serial/vr41xx_siu.c | 2 +- drivers/tty/serial/vt8500_serial.c | 2 +- drivers/tty/serial/xilinx_uartps.c | 9 + drivers/tty/serial/zs.c | 2 +- drivers/tty/tty_buffer.c | 19 +- drivers/tty/tty_io.c | 52 +- drivers/tty/tty_port.c | 65 +- drivers/tty/vt/vt.c | 9 + drivers/video/console/Kconfig | 27 +- drivers/video/console/vgacon.c | 164 ++- include/linux/console.h | 4 + include/linux/serdev.h | 262 +++++ include/linux/serial_core.h | 2 +- include/linux/serial_sci.h | 15 - include/linux/tty.h | 12 +- include/uapi/linux/serial_core.h | 3 +- include/uapi/linux/serial_reg.h | 26 +- lib/Kconfig.debug | 10 + 116 files changed, 3057 insertions(+), 1640 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/slave-device.txt create mode 100644 drivers/tty/serdev/Kconfig create mode 100644 drivers/tty/serdev/Makefile create mode 100644 drivers/tty/serdev/core.c create mode 100644 drivers/tty/serdev/serdev-ttyport.c create mode 100644 drivers/tty/serial/8250/8250_exar.c create mode 100644 include/linux/serdev.h
| |