lkml.org 
[lkml]   [2017]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH RFC] net: stmmac: unify registers dumps methods
Date
hello

The following patch address the problem that two way of dumping registers are
available in stmmac, via ethtool and directly at init (if NETIF_MSG_HW is enabled).
It is better to keep only one method, ethtool, since the other was ugly (logs of pr_xxx).

But by working on this issue, I saw two problem:
- "ethtool" for gmac/gmac4 always dump the 55 first registers, while dwmac4_dump_regs dump the first 132 registers, so clearly the current stmmac_ethtool_gregs miss some registers
- stmmac_ethtool_gregs claim to dump whole address space (len=REG_SPACE_SIZE), but in fact concat two distant address space.

The current patch address all by being bijective between reg_space and address space, so all DMA registers goes to their "real" address in reg_space.
But this fix break the pretty print of registers name of ethtool. (ethtool -d eth0 hex on still works).

What do you think about this issue ?

Corentin Labbe (1):
net: stmmac: unify registers dumps methods

drivers/net/ethernet/stmicro/stmmac/common.h | 4 +-
.../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 10 +--
.../net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 16 ++---
.../net/ethernet/stmicro/stmmac/dwmac100_core.c | 30 +++------
drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 15 ++---
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 12 +---
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 78 +++++++++++-----------
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 21 +-----
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 --
9 files changed, 71 insertions(+), 120 deletions(-)

--
2.10.2

\
 
 \ /
  Last update: 2017-02-20 14:48    [W:0.034 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site