lkml.org 
[lkml]   [2017]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] arm: dts: sun8i: a83t: a711: Add touchscreen node
Date
Tha A711 tablet has a FocalTech EDT-FT5x06 Polytouch touchscreen.
It is connected via I2C0 so add his node in i2c0's node.

The reset line is PD5, the interrupt line is PL7 and the power
supply is the ldo_io0 regulator.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
---
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 84cca1a48cea..738359917a34 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -110,6 +110,17 @@
pinctrl-0 = <&i2c0_pins>;
clock-frequency = <400000>;
status = "okay";
+
+ polytouch: edt-ft5x06@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>;
+ power-supply = <&reg_ldo_io0>;
+ touchscreen-size-x = <1024>;
+ touchscreen-size-y = <600>;
+ };
};

&mmc0 {
--
2.11.0
\
 
 \ /
  Last update: 2017-12-08 22:55    [W:0.189 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site